Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for DR20T1B02-AZAKD
The DR20T1B02-AZAKD specifies: The DR Series uses the AZ Series equipped with the Absolute Sensor for the driving motor. The Absolute Sensor is a mechanical multi-turn Absolute Sensor, so an external sensor is not required. This helps to save space and reduce wiring, as well as more compact and lightweight design of the equipment., Low Vibration, High Positioning Accuracy, Reliable Design and Structure, *Connection cables required (sold separately),
Motor Type | - AZ Series with Absolute Sensor |
Actuator Frame Size | - 20 mm |
Drive Method | - Precision Ball Screw |
Type | - Table Type |
Guide | - Equipped |
Cable Direction | - Down |
Mount | - Not Equipped |
Electromagnetic Brake | - Not Equipped |
Adjusting Knob | - Not Equipped |
Ball Screw Cover | - Not Equipped |
Lead | - 1 mm |
Stroke | - 25 mm |
Max. Vertical Transportable Mass | - 1 kg |
Max. Horizontal Transportable Mass | - 0.5 kg |
Max. Speed | - 20 mm/s |
Max. Thrust Force | - 15 N |
Max. Holding Force | - 15 N |
Repetitive Positioning Accuracy | - Table Tip on Ball Screw Shaft: ±0.003 mm, Upper Side of Linear Guide: ±0.01 mm mm |
Lost Motion | - 0.02 mm max. |
Minimum Travel Amount | - 0.001 mm |
Maximum Load Moment | - MP: 0.1 N·m MY: 0.05 N·m MR: 0.15 N·m |
RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards | - CE |
Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the motor windings and case. |
Dielectric Strength | - Sufficient to withstand 0.5 kV at 50 Hz or 60 Hz applied between the motor windings and case for 1 minute. |
Ambient Temperature Range | - 32ºF ~ 104ºF (0ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity | - 85% or less (noncondensing) |
Product options for DR20T1B02-AZAKD
Product tips for DR20T1B02-AZAKD
Product announcements for DR20T1B02-AZAKD
Product documents for DR20T1B02-AZAKD
- DR Series Table Type Operating Manual | |
- DR/DRS Series Function Setting Manual | |
- 3D CAD (*.step) |