Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for AZM14AK
The AZM14AK specifies: , The AlphaStep AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Absolute Mechanical Encoder, absolute-type positioning is available, without battery back up or external sensors to buy., Requires AlphaStep AZ Series Driver, *Connection Cables required (sold separately),
Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||||
Frame Size | - 0.79 in, 20 mm | |||||||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 1.97 in., 50 mm | |||||||||||||||||||||||||||||||||||||||||||||||
Driver Voltage Input Power | - DC | |||||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 2.8 oz-in, 0.02 N·m | Holding Torque at Motor Standstill | - 1.42 oz-in, 0.01 N·m | Type | - Absolute Mechanical Encoder | Shaft/Gear Type | - Round Shaft with Flat (No Gearhead) | Shaft | - Single | Electromagnetic Brake | - Not Equipped | Resolution (Resolution Setting: 1000 P/R) | - 0.36 °/Pulse | Rotor Inertia | - 0.0148 oz-in², 2.7x10-7 kg·m² | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Safety Standards | - UL, CE | CE Marking | - Low Voltage Directives, EMC Directives | Insulation Class | - Class B [130ºC (266ºF)] | [Recognized as 105 (A) by UL.] Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the following places: | Case - Motor and sensor windings Dielectric Strength | - Sufficient to withstand the following for 1 minute: | Case - Motor and sensor windings 0.5 kVAC 50 Hz or 60 Hz Ambient Temperature | - 0 ~ 40ºC (32 ~ 104ºF) (non-freezing) | Ambient Humidity | - 85% or less (Non-condensing) | Degree of Protection | - IP40 (excluding the mounting surface and connector) | Stop Position Accuracy | - ±5 arc minutes (±0.083º) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | Permissible Overhung Load | - 0 in. from Shaft End = 2.7 lb, 0.2 in. from Shaft End = 3.3 lb, 0 mm from Shaft End = 12 N, 5 mm from Shaft End = 15 N | Permissible Axial Load | - 0.67 lb, 3 N | |
Product options for AZM14AK
Product tips for AZM14AK
Product announcements for AZM14AK
Product documents for AZM14AK
- Product Brochure | |
- AZ Series Motor Operating Manual | |
- 3D CAD (Motor) (*.step) |