Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for LE250DC1 W/30
The LE250DC1 W/30 specifies: , Laser Displacement Sensor;Range: 100-400 mm, Input: 12-30 V dc; Outputs: Discrete: 2 NPN/PNP configurable;Class 1 Laser,9 m (30 ft) Cable, , Part Number:95396,
| Sensing Beam | - Visible Red Laser |
| Max Measurement Range | - >100 mm - <=500 mm |
| Power | - DC |
| Cable Length (m) | - 9 |
| PC Configurable | - No |
| Sensing Mode (General) | - Proximity |
| Sensing Mode (Detailed) | - Triangulation |
| Housing Style | - Rectangular |
| Device Type | - Sensor |
| Primary Housing Material | - Zinc Alloy Die-Cast |
| Laser Classification | - Class 1 |
| Input/Output | - Discrete |
| Indicator | - LCD; LED(s) |
| Connection | - Flying Leads |
| Quick Disconnect Type | - No QD |
| Analog Resolution/Discrete Repeatability | - 100 mm to 250 mm: < 0.02; 250 mm to 400 mm: < 0.2 |
| Max Sensing Distance (mm) | - 400 |
| Minimum Sensing Distance (mm) | - 100 |
| Power Supply | - 12-30 V dc |
| Delay at Power-up (ms) | - 1000 |
| Sensing Beam Wavelength (nm) | - 650 |
| Adjustments | - Push Button; Remote Teach |
| Temperature Effect (mm/°C) | - +/- 0.03 mm/°C from 100 to 250 mm, +/- 0.15 mm /°C at 1000 mm |
| Number of Pins | - 5 |
| Vibration | - MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G). |
| Mechanical Shock | - IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave |
| Output Saturation Voltage NPN Outputs | - < 1.6 V at 100 mA |
| Output Saturation Voltage PNP Outputs | - < 3 V at 100 mA |
| Max Discrete (Switched) Output (mA) | - 100 |
| Discrete (Switched) Outputs | - 2 NPN/PNP Configurable |
| Output Protection | - Protected against continuous overload and short circuit |
| IP Rating | - IP67 |
| NEMA Rating | - NEMA 6 |
| Storage Temperature (°C) | - -30 to 65 |
| Max Operating Temperature (°C) | - 55 |
| Min Operating Temperature (°C) | - -20 |
| Max Op. Relative Humidity Non-Condensing (%) | - 90 at 55°C |
| Window Material | - Acrylic |
| Warm-up Time (minutes) | - 10 |
| Minimum Response Time (ms) | - 2 |
| Spot Size (@ Reference Distance) | - 0.9 mm x 1.2 mm @ 400 mm |
| Minimum Window Size (mm) | - 1 |
| Remote Teach and Laser Control Input Impedence | - 18 kΩ min. (65 kΩ min at 5 V dc) |
| Discrete Output Hysteresis (mm) | - Automatically adjusted |
| Laser Control | - Yes |
| Alarm Output (mA) | - 100 |
| Max Ambient Light (Lux) | - 5000 |
| Max Off-state Leakage Current (µA) | - NPN: < 200 at 30 V dc; PNP: < 10 at 30 V dc |
| Power/Current Consumption (exclusive of load) | - 70 mA @ 24 V dc |
| Supply Protection Circuitry | - Protected against reverse polarity and transient overvoltages |
| Feature: Remote Teach | - Yes |
| Feature: Timing (Hold/Delay) | - Yes |
| Feature: Chemical Resistant | - No |
| Feature: Quick Disconnect | - No |
| Feature: Health/ Marginal Signal Output | - Yes |
| Common Ethernet Protocol | - No |
| IO Link | - No |
| PROFINET | - No |
| RS-232 | - No |
| RS-422 | - No |
| RS-485 | - No |
| SSI | - No |
| Wireless | - No |
| 1-wire Serial Interface | - No |
| Profibus | - No |
Product options for LE250DC1 W/30
COMPATIBLE PRODUCTS | |
| Bracket | - - |
| Bracket | - - |
| Bracket | - - |
| Bracket | - - |
| Bracket | - - |
| Bracket | - - |
| Single-Ended Cordsets | - Single-Ended Cordsets - MQDEC2-506 |
| Single-Ended Cordsets | - Single-Ended Cordsets - MQDEC2-515 |
| Single-Ended Cordsets | - Single-Ended Cordsets - MQDEC2-530 |
| Single-Ended Cordsets | - Single-Ended Cordsets - MQDC1-506 |
| Single-Ended Cordsets | - Single-Ended Cordsets - MQDC1-515 |
| Single-Ended Cordsets | - Single-Ended Cordsets - MQDC1-530 |
