Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for LTF12KC2LDQ
The LTF12KC2LDQ specifies: , Laser Diffuse Time-of-Flight Sensor; Range: 50-12000 mm, Input:12-30 V dc; Output 1: NPN/PNP Configurable; IO-Link, Output 2: NPN/PNP configurable; Class 2 Laser, Integral Quick-Disconnect, , Part Number:801130,
| Sensing Beam | - Visible Red Laser |
| PFM Output | - Yes |
| Max Measurement Range | - >1 m - <=20 m |
| Power | - DC |
| PC Configurable | - No |
| Sensing Mode (General) | - Proximity |
| Sensing Mode (Detailed) | - Time of Flight |
| Housing Style | - Rectangular |
| Device Type | - Sensor |
| Primary Housing Material | - Zinc Alloy Die-Cast |
| Laser Classification | - Class 2 |
| Input/Output | - Discrete |
| Indicator | - Display; LED(s) |
| Connection | - Integral QD |
| Quick Disconnect Type | - M12 (Euro) |
| Analog Resolution/Discrete Repeatability | - 1 |
| Max Sensing Distance (mm) | - 12000 |
| Minimum Sensing Distance (mm) | - 50 |
| Power Supply | - 12-30 V dc |
| Delay at Power-up (ms) | - 2000 |
| Sensing Beam Wavelength (nm) | - 660 |
| Adjustments | - Push Button; Remote Teach |
| Temperature Effect (mm/°C) | - 0.25mm/C (typical) |
| Number of Pins | - 5 |
| Vibration | - MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G). |
| Mechanical Shock | - IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave |
| Output Saturation Voltage NPN Outputs | - < 1.6V @ 100ma |
| Output Saturation Voltage PNP Outputs | - < 3V @ 100ma |
| Max Discrete (Switched) Output (mA) | - 100 |
| Discrete (Switched) Outputs | - 2 NPN/PNP Configurable |
| Output Protection | - Protected against continuous overload and short circuit |
| IP Rating | - IP67 |
| NEMA Rating | - NEMA 6 |
| Storage Temperature (°C) | - -30 to 65 |
| Max Operating Temperature (°C) | - 55 |
| Min Operating Temperature (°C) | - -20 |
| Max Op. Relative Humidity Non-Condensing (%) | - 90 at 55°C |
| Window Material | - Acrylic |
| Warm-up Time (minutes) | - 15 |
| Minimum Response Time (ms) | - 1.5 |
| Spot Size (@ Reference Distance) | - 6.5 mm at 50 mm, 12.5 mm at 12000 mm |
| Analog Linearity (mm) | - +/- 10 |
| Minimum Window Size (mm) | - 10 |
| Discrete Output Hysteresis (mm) | - Automatically adjusted or manually settable from 2 to 11950 mm |
| Laser Control | - Yes |
| Alarm Output (mA) | - 100 |
| Max Ambient Light (Lux) | - 40000 |
| Max Off-state Leakage Current (µA) | - PNP <10µA at 30V, NPN <200µa at 30V |
| Power/Current Consumption (exclusive of load) | - <85 mA @ 24 V (< 2.1 W) |
| Supply Protection Circuitry | - Protected against reverse polarity and transient overvoltages |
| Typical Laser Lifetime (Hours) | - 60000 |
| Feature: Remote Teach | - Yes |
| Feature: Timing (Hold/Delay) | - Yes |
| Feature: Chemical Resistant | - No |
| Feature: Pump-in/ Pump-out | - Yes |
| Feature: Quick Disconnect | - Yes |
| Feature: Health/ Marginal Signal Output | - Yes |
| Common Ethernet Protocol | - No |
| IO Link | - Yes |
| PROFINET | - No |
| RS-232 | - No |
| RS-422 | - No |
| RS-485 | - No |
| SSI | - No |
| Wireless | - No |
| 1-wire Serial Interface | - No |
| Profibus | - No |
Product options for LTF12KC2LDQ
COMPATIBLE PRODUCTS | |
| Bracket | - - |
| Bracket | - - |
| Bracket | - - |
| Bracket | - - |
| Bracket | - - |
| Bracket | - - |
| Bracket | - - |
| Bracket | - - |
| Bracket | - - |
| Bracket | - - |
| Bracket | - - |
| Bracket | - - |
| Bracket | - - |
| Bracket | - - |
| Single-Ended Cordsets | - Single-Ended Cordsets - MQDEC2-506 |
| Single-Ended Cordsets | - Single-Ended Cordsets - MQDEC2-515 |
| Single-Ended Cordsets | - Single-Ended Cordsets - MQDEC2-530 |
| Single-Ended Cordsets | - Single-Ended Cordsets - MQDEC2-550 |
| Single-Ended Cordsets | - Single-Ended Cordsets - MQDEC2-506 |
| Single-Ended Cordsets | - Single-Ended Cordsets - MQDEC2-515 |
| Single-Ended Cordsets | - Single-Ended Cordsets - MQDEC2-530 |
| Single-Ended Cordsets | - Single-Ended Cordsets - MQDEC2-550 |
