Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for DRL28G-03A1P-KD
The DRL28G-03A1P-KD specifies: High-precision integrated ball screw incorporated into a stepper motor for continuous high-positioning linear motion. Reduces the number of components such as couplings and secondary external guides to make equipment more compact, quicker to install with less parts to order., The built-in controller (stored data) allows for easy networking and simplified multi-axis control., Controller connection options: 1: I/O, 2: Modbus (RTU/RS-485) or 3: FA Network (network converter), Low Vibration, High Positioning Accuracy, Reliable Design and Structure, ,
| Motor Type | - 5-Phase |
| Actuator Frame Size | - 1.1 in., 28 mm |
| Drive Method | - Rolled Ball Screw |
| Repetitive Positioning Accuracy | - ±0.00039 in., ±0.01 mm |
| Maximum Load Moment | - MP: 18.4 oz-in MY: 9.91 oz-in MR: 42.48 oz-in , MP: 0.13 N·m MY: 0.07 N·m MR: 0.3 N·m |
| Lost Motion | - 0.00197 in. , 0.05 mm |
| Power Supply | - 24 VDC |
| Current | - 0.7 A |
| Type | - Standard |
| Guide | - Equipped |
| Electromagnetic Brake | - Not Equipped |
| Adjusting Knob | - Not Equipped |
| Lead | - 0.04 in., 1 mm |
| Stroke | - 1.18 in., 30 mm |
| Actuator Connection Type | - Lead Wire |
| Lead Wires | - 5 |
| Max. Vertical Transportable Mass | - 3.30 lb, 1.5 kg |
| Max. Horizontal Transportable Mass | - 2.20 lb, 1 kg |
| Max. Speed | - 1.57 in/s, 40 mm/s |
| Max. Thrust Force | - 6.70 lb, 30 N |
| Max. Holding Force | - 6.70 lb, 30 N |
| Resolution | - 0.000079 in. , 0.002 mm |
| Components | - DRLM28G-03A1P-K [Actuator] LRD507-KD [Driver] |
| RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| Safety Standards | - CE |
| Insulation Resistance | - [Actuator] 100 MΩ or more when 500 VDC megger is applied between the motor windings and case. [Driver] The measured value is 100 MΩ or more when a 500 VDC megger is applied between the FG Terminal - Power Input Terminal. |
| Dielectric Strength | - [Actuator] Sufficient to withstand 0.5 kV at 50 Hz or 60 Hz applied between the motor windings and case for 1 minute. |
| Ambient Temperature Range | - 32ºF ~ 104ºF (0ºC ~ 40ºC) (nonfreezing) |
| Ambient Humidity | - 85% or less (noncondensing) |
Product options for DRL28G-03A1P-KD
COMPATIBLE PRODUCTS | |
| Accessories | - Control Module - OPX-2A |
| Accessories | - Data Setting Software Communication Cable - CC05IF-USB |
| Accessories | - Control Module - OPX-2A |
| Accessories | - Data Setting Software Communication Cable - CC05IF-USB |
| Accessories | - Mounting Plate - PADRL-28 |
| Accessories | - Extension Cable (16.4 ft. [5 m]) - CC05PK5 |
| Accessories | - Extension Cable (32.8 ft. [10 m]) - CC10PK5 |
| Accessories | - RS485 Communication Cable (0.33 ft. [0.1 m]) - CC001-RS4 |
| Accessories | - RS485 Communication Cable (0.82 ft. [0.25 m]) - CC002-RS4 |
| Network Converters | - Network Gateway (EtherCAT) - NETC01-ECT |
| Network Converters | - Network Gateway (CC-Link Compatible) - NETC01-CC |
| Network Converters | - Network Gateway (EtherCAT) - NETC01-ECT |
| Network Converters | - Network Gateway (CC-Link Compatible) - NETC01-CC |
| Network Converters | - Network Gateway (MECHATROLINK - II Compatible) - NETC01-M2 |
| Network Converters | - Network Gateway (MECHATROLINK - III Compatible) - NETC01-M3 |
