Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for DG130R-ARAS2
The DG130R-ARAS2 specifies: This package part number is scheduled to be discontinued. We are now offering these as component products., Please contact your local sales office for updated part numbers.
| Frame Size | - 5.12 in, 130 mm |
| Power Supply | - Three-Phase 200-230 VAC |
| Shaft | - Single |
| Electromagnetic Brake | - Not Equipped |
| Output Table Supporting Bearing | - Cross-Roller Bearing |
| Permissible Torque | - 106 lb-in, 12 N·m |
| Inertia | - 150620x10-7 kg·m², 820 oz-in² |
| Permissible Speed (r/min) | - 200 |
| Gear Ratio (X:1) | - 18 :1 |
| Max. Holding Torque | - 106 lb-in, 12 N·m |
| Resolution | - 18000 P/R (0.02º) |
| Frequency | - 50/60 Hz |
| Input Current | - 1.4 A |
| Control Power Supply | - 24 VDC ±5% 0.5 A |
| Repetitive Positioning Accuracy (arc sec) | - ±15 arc sec (±0.004º) |
| Lost Motion | - 2 arc minute (0.033°) |
| Angular Transmission Accuracy | - 3 arc minute (0.05º) |
| Permissible Thrust Load | - 2000 N, 450 lb |
| Permissible Moment Load | - 50 N·m, 440 lb-in |
| Runout of Output Table Surface | - 0.02 mm, 0 in. |
| Runout of Output Table Inner (Outer) Diameter | - 0.02 mm, 0 in. |
| Parallelism of Output Table | - 0.03 mm, 0 in. |
| Degree of Protection | - [Actuator] IP40 (IP20 for motor connector), [Driver] IP20 |
| Insulation Class | - 130 (B) |
| Insulation Resistance (Actuator) | - 100 MΩ minimum when measured by a 500 VDC megger between the Case - Motor and Sensor Windings |
| Dielectric Strength (Actuator) | - No abnormality is found with the following application for 1 minute: Case - Motor and Sensor Windings 1.5kV, 50 Hz or 60 Hz |
| Ambient Temperature (Actuator) | - 0 ~ +50ºC (+32 ~ 122ºF)(non-freezing) 0 ~ +40ºC (+32 ~ 104ºF)(non-freezing) when home-sensor set (accessory is attached) |
| Ambient Temperature (Driver) | - 0 ~ +50ºC (+32 ~ +122ºF) (non-freezing) |
| Ambient Humidity | - 85% max. (non-condensing) |
| Operating Atmosphere | - Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids. |
| Safety Standards | - CE |
| RoHS Compliant | - Yes |
| Components | - ARD-S (Driver), DGM130R-ARAC (Actuator) |
