Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for DGB130R18-AZMCR
The DGB130R18-AZMCR specifies: The DGII Series uses a highly rigid hollow rotary table with an absolute mechanical encoder AZ series closed loop motor allowing for highly accurate positioning of larger inertia loads., Large-Diameter, Hollow Output Table, Direct Coupling,
| Frame Size | - 5.12 in, 130 mm |
| Shaft | - Single |
| Gear Ratio (X:1) | - 18 :1 |
| Motor Location | - Horizontal Mount |
| Cable Direction | - Right |
| Electromagnetic Brake | - Equipped |
| Output Table Supporting Bearing | - Cross-Roller Bearing |
| Permissible Torque | - 106 lb-in, 12 N·m |
| Inertia | - 199000x10-7 kg·m², 1080 oz-in² |
| Permissible Speed (r/min) | - 1200º/seconds (200 r/min) |
| Max. Holding Torque | - 106 lb-in, 12 N·m |
| Repetitive Positioning Accuracy (arc sec) | - ±30 arc sec (±0.008º) |
| Angular Transmission Accuracy | - 6 arc minute (0.1º) |
| Permissible Moment Load | - 50 N·m, 440 lb-in |
| Runout of Output Table Surface | - 0.015 mm, 0.0006 in. |
| Runout of Output Table Inner (Outer) Diameter | - 0.015 mm, 0.0006 in. |
| Parallelism of Output Table | - 0.03 mm, 0.0012 in. |
| Degree of Protection | - Actuator: IP40 (IP20 for motor connector) |
| Insulation Class | - 130 (B) [Recognized as 105 (A) by the UL Standards] |
| Insulation Resistance (Actuator) | - 100 MΩ minimum when measured by a 500 VDC megger between the Case - Motor Windings, Case - Electromagnetic Brake Windings |
| Dielectric Strength (Actuator) | - Sufficient to withstand the following for 1 minute: Case - Motor Windings 1.5 kV, 50 Hz or 60 Hz Case - Electromagnetic Brake Windings 1.5 kVAC, 50 Hz or 60 Hz |
| Ambient Temperature (Actuator) | - 0 ~ +40ºC (+32 ~ 104ºF)(non-freezing) |
| Ambient Humidity | - 85% or less (Non-condensing) |
| Operating Atmosphere | - Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids. |
| Safety Standards | - UL, CE |
| RoHS Compliant | - This product does not contain substances that exceed the regulation values in the RoHS Directive |
| Power Supply | - AC Input |
Product options for DGB130R18-AZMCR
Product tips for DGB130R18-AZMCR
Product announcements for DGB130R18-AZMCR
Product documents for DGB130R18-AZMCR
| - DGII Series Operating Manual | |
| - Motorized Actuator Function Setting | |
| - CAD 3D (*.step) |
