Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for DG130R-AZMAD
The DG130R-AZMAD specifies: This package part number has been discontinued. We are now offering these as component products., Please contact your local sales office for updated part numbers.
| Frame Size | - 5.12 in, 130 mm |
| Power Supply | - Single-Phase 100-120 VAC |
| Shaft | - Single |
| Electromagnetic Brake | - Equipped |
| Output Table Supporting Bearing | - Cross-Roller Bearing |
| Permissible Torque | - 106.20 lb-in, 12 N·m |
| Inertia | - 199220x10-7 kg·m², 1089.23 oz-in² |
| Permissible Speed (r/min) | - 1200º/seconds (200 r/min) |
| Gear Ratio (X:1) | - 18 :1 |
| Max. Holding Torque | - 106.20 lb-in, 12 N·m |
| Resolution (Resolution Setting: 2000 P/R) | - 36000 P/R (0.01º) |
| Frequency | - 50/60 Hz |
| Control Power Supply | - 24 VDC ±5% 0.5 A |
| Repetitive Positioning Accuracy (arc sec) | - ±15 arc sec (±0.004º) |
| Lost Motion | - 2 arc minute (0.033°) |
| Angular Transmission Accuracy | - 3 arc minute (0.05º) |
| Permissible Thrust Load | - 2000 N, 449.60 lb |
| Permissible Moment Load | - 50 N·m, 442.54 lb-in |
| Runout of Output Table Surface | - 0.015 mm, 0.00059 in. |
| Runout of Output Table Inner (Outer) Diameter | - 0.015 mm, 0.00059 in. |
| Parallelism of Output Table | - 0.03 mm, 0.00118 in. |
| Degree of Protection | - Actuator: IP40 (IP20 for motor connector) Driver: IP10 |
| Insulation Class | - 130 (B) [Recognized as 105 (A) by the UL Standards] |
| Insulation Resistance (Actuator) | - 100 MΩ minimum when measured by a 500 VDC megger between the Case - Motor Windings, Case - Electromagnetic Brake Windings |
| Insulation Resistance (Driver) | - 100 M Ω minimum when measured by a 500 VDC megger between the PE Terminal - Power Supply Terminal, Encoder connector - Power Supply Terminal, I/O Signal Terminals - Power Supply Terminal |
| Dielectric Strength (Actuator) | - Sufficient to withstand the following for 1 minute: Case - Motor Windings 1.5 kV, 50 Hz or 60 Hz Case - Electromagnetic Brake Windings 1.5 kVAC, 50 Hz or 60 Hz |
| Dielectric Strength (Driver) | - Sufficient to withstand the following for 1 minute: PE Terminal - Power Supply Terminal 1.5 kV, 50 Hz or 60 Hz Encoder Connector - Power Supply Terminal 1.8 kVAC, 50 Hz or 60 Hz I/O Terminal - Power Supply Terminal 1.8 kV, 50 Hz or 60 Hz |
| Ambient Temperature (Actuator) | - 0 ~ +40ºC (+32 ~ 104ºF)(non-freezing) |
| Ambient Temperature (Driver) | - 0 ~ +55ºC (+32 ~ 131ºF)(non-freezing) |
| Ambient Humidity | - 85% or less (Non-condensing) |
| Operating Atmosphere | - Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids. |
| Safety Standards | - UL, CE |
| RoHS Compliant | - This product does not contain substances that exceed the regulation values in the RoHS Directive |
| Components | - DGM130R-AZMC (Actuator) AZD-AD (Driver) |
| Input Current | - 3.8 A |
Product options for DG130R-AZMAD
Product tips for DG130R-AZMAD
Product announcements for DG130R-AZMAD
Product documents for DG130R-AZMAD
| - DGII Series Operating Manual | |
| - AZ Series Operating Manual | |
| - Motorized Actuator Function Setting | |
| - AZ Series Function Manual | |
| - 3D CAD (Driver) (*.step) |
