Power Controller for Torque Motors - TMP-1

Product specifications for TMP-1

The TMP-1 specifies: A power controller developed for Oriental Motor's torque motors that allows for easy adjustment of torque. A perfect choice for winding applications, push-motion mechanisms and other situations where torque must be adjusted, Torque can be set using one of three methods; internal potentiometer, external potentiometer or external DC voltage, Change between two levels by switching between the internal potentiometer and an external potentiometer/voltage, Alarm output function, Instantaneous bi-directional operation by CW/CCW signal switching, Switching of signal input logic between sink and source,

Power Supply	- Single-Phase 100/110/115 VAC ±10% 50/60 Hz, Single-Phase 200/220/230 VAC ±10% 50/60 Hz
Power Source for Control	- 24 VDC ±10%, 100 mA or more
Input Signals	- Photocoupler input, Input resistance 4.7 kΩ CW input, CCW input, INT/EXT switch input, Alarm reset input
Output Signals	- Open collector output: 4.5 ~ 26.4 VDC or less, 40 mA or less. Alarm output
RoHS Compliant	- Yes
Safety Standards	- UL, EN, CE
CE Marking	- Low Voltage Directives, EMC Directives
Insulation Resistance	- 100 MΩ or more when 500 VDC megger is applied between the main circuit terminals and the control circuit terminals after continuous operation under normal ambient temperature and humidity.
Dielectric Strength	- Sufficient to withstand 3.0 kVAC at 50 Hz or 60 Hz applied between the main circuit terminals and the control circuit terminals for 1 minute under normal ambient temperature and humidity.
Ambient Temperature	- 0 ~ 50ºC (32 ~ 122ºF) (non-freezing)
Ambient Humidity	- 85% or less (Non-condensing)
Degree of Protection	- IP20