Induction Motor - BHI62S-G2

Product specifications for BHI62S-G2

The BHI62S-G2 specifies: Induction motors are optimal for uni-directional continuous operation such as a conveyor system., The smallest frame size (4.09 inch [104 mm]) in the 1/3.73 HP (200 W) output class, Approved under typical international safety standards; bears the CE marking, Gearhead required,

Product Line	- Oriental Motor®
Motor Type	- Induction
Frame Size	- 4.09 in, 104 mm
Output Power	- 200 W (1/4 HP)
Voltage (VAC)	- Three-Phase 200/220/230 VAC
Frequency (Hz)	- 60, 50
Current	- 0.95 A [220/230 VAC], 1.1 A [200 VAC]
Shaft/Gear Type	- Pinion Shaft (Gearhead required - sold separately)
Type	- Cable
RoHS Compliant	- Yes
Safety Standards	- UL, CSA, CCC, CE
CE Marking	- Low Voltage Directives
Electromagnetic Brake	- Not Equipped
Insulation Resistance	- 100 MΩ or more when 500 VDC is applied between the windings and the case after rated motor operation under normal ambient temperature and humidity.
Dielectric Strength	- Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated motor operation under normal ambient temperature and humidity.
Temperature Rise	- Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead
Insulation Class	- Class B (266ºF [130ºC])
Overheat Protection	- Built-in thermal protector (Automatic return type). Operating temperature, open: 302ºF ± 9ºF (150ºC ± 5ºC) close: 204.8ºF ± 27ºF (96ºC ± 15ºC)
Ambient Temperature Range	- 14ºF ~ 104ºF (-10ºC ~ 40ºC) [Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC)] (non-freezing)
Ambient Humidity	- 85% or less (Non-condensing)
Degree of Protection	- IP40