Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for SCM540KECM-5H10B
The SCM540KECM-5H10B specifies: The SCM Series features AC speed control motors that utilized Oriental Motor's exclusive technology., Closed Loop Control for High Reliability, Easy Installation and Simple Data Setting, Compact Motor, *Connection cables required (sold separately).,
| Product Line | - Oriental Motor® |
| Motor Type | - AC Motor |
| Motor | - Induction |
| Frame Size | - 3.54 in, 90 mm |
| Output Power | - 40 W (1/19 HP) |
| Power Supply | - Single-Phase 220/230 VAC |
| Frequency (Hz) | - 60, 50 |
| Current | - 0.55 A |
| Shaft/Gear Type | - Right-Angle Hollow Shaft (Stainless Steel) Gearhead |
| Gear Ratio (X:1) | - 10 :1 |
| Output Shaft Diameter | - 15 mm |
| Electromagnetic Brake | - Equipped |
| Permissible Torque | - [Deceleration Control: ON] 6.1 lb-in [Deceleration Control: OFF] 14.1 lb-in , [Deceleration Control: ON] 0.7 N·m [Deceleration Control: OFF] 1.6 N·m |
| Variable Speed Range (r/min) | - [Deceleration Control: ON] 30 ~ 140 [50 Hz] 30 ~ 160 [60 Hz] [Deceleration Control: OFF] 9 ~ 140 [50 Hz] 9 ~ 160 [60 Hz] |
| Permissible Load Inertia | - 1090 oz-in², 200 x 10-4 kg·m² |
| Permissible Overhung Load | - 0.39 in. from Installation Surface = 93 lb, 0.79 in. from Installation Surface = 81 lb, 10 mm from Installation Surface = 415 N, 20 mm from Installation Surface = 363 N |
| Permissible Thrust Load | - 24 lb, 108 N |
| RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| Safety Standards | - c-UL, CCC, CE |
| CE Marking | - Low Voltage Directives, EMC Directive |
| Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity. |
| Dielectric Strength | - Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity. |
| Temperature Rise | - A gearhead or equivalent heat sink is connected to the motor and the winding temperature rise is measured at 176ºF (80ºC) or less using the resistance change method after rated operation with no load under normal ambient temperature and humidity. |
| Overheat Protection Device | - Built-in Thermal Protector (automatic return type) |
| Ambient Temperature Range | - 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| Ambient Humidity | - 85% max. (non-condensing) |
| Altitude | - Max. of 1000 m (3300 ft.) above sea level |
| Thermal Class | - 130 (B) |
| Degree of Protection | - IP20 |
Product options for SCM540KECM-5H10B
Product tips for SCM540KECM-5H10B
Product announcements for SCM540KECM-5H10B
Product documents for SCM540KECM-5H10B
| - SCM Motor Operating Manual | |
| - 3D CAD (Motor / Rack and Pinion) (*.step) |
