Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for SCM540KUAM-5L50B
The SCM540KUAM-5L50B specifies: The SCM Series features AC speed control motors that utilized Oriental Motor's exclusive technology., Closed Loop Control for High Reliability, Easy Installation and Simple Data Setting, Compact Motor, *Connection cables required (sold separately).,
| Product Line | - Oriental Motor® |
| Motor Type | - AC Motor |
| Motor | - Induction |
| Frame Size | - 3.54 in, 90 mm |
| Output Power | - 40 W (1/19 HP) |
| Power Supply | - Single-Phase 110/115 VAC |
| Frequency (Hz) | - 60 |
| Current | - 1.1 A |
| Shaft/Gear Type | - Right-Angle Solid Shaft (Stainless Steel) Gearhead |
| Gear Ratio (X:1) | - 50 :1 |
| Output Shaft Diameter | - 18 mm |
| Electromagnetic Brake | - Equipped |
| Permissible Torque | - [Deceleration Control: ON] 30 lb-in [Deceleration Control: OFF] 70 lb-in , [Deceleration Control: ON] 3.5 N·m [Deceleration Control: OFF] 8 N·m |
| Variable Speed Range (r/min) | - [Deceleration Control: ON] 6 ~ 32 [Deceleration Control: OFF] 1.8 ~ 32 |
| Permissible Load Inertia | - 27000 oz-in², 5000 x 10-4 kg·m² |
| Permissible Overhung Load | - 0.39 in. from Shaft End = 220 lb, 0.79 in. from Shaft End = 280 lb, 20 mm from Shaft End = 1287 N, 10 mm from Shaft End = 1011 N |
| Permissible Thrust Load | - 66 lb, 294 N |
| RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| Safety Standards | - c-UL, CCC, CE |
| CE Marking | - Low Voltage Directives, EMC Directive |
| Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity. |
| Dielectric Strength | - Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity. |
| Temperature Rise | - A gearhead or equivalent heat sink is connected to the motor and the winding temperature rise is measured at 176ºF (80ºC) or less using the resistance change method after rated operation with no load under normal ambient temperature and humidity. |
| Overheat Protection Device | - Built-in Thermal Protector (automatic return type) |
| Ambient Temperature Range | - 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| Ambient Humidity | - 85% max. (non-condensing) |
| Altitude | - Max. of 1000 m (3300 ft.) above sea level |
| Thermal Class | - 130 (B) |
| Degree of Protection | - IP20 |
Product options for SCM540KUAM-5L50B
Product tips for SCM540KUAM-5L50B
Product announcements for SCM540KUAM-5L50B
Product documents for SCM540KUAM-5L50B
| - SCM Motor Operating Manual | |
| - 3D CAD (Motor / Rack and Pinion) (*.step) |
