Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for DSCI26UA-30AV
The DSCI26UA-30AV specifies: This item has been discontinued. Contact Technical Support for replacement.
| Product Line | - Oriental Motor® |
| Motor Type | - AC Motor |
| Motor | - Induction |
| Frame Size | - 2.36 in, 60 mm |
| Output Power | - 6 W (1/125 HP) |
| Power Supply | - Single-Phase 110/115 VAC |
| Frequency (Hz) | - 60 |
| Current | - 0.28 A |
| Control Power Source | - 24 VDC ±10% 0.15 A or more |
| Shaft/Gear Type | - Parallel Shaft Gearhead |
| Gear Ratio (X:1) | - 30 :1 |
| Output Shaft Diameter | - 3/8 in. |
| Electromagnetic Brake | - Not Equipped |
| Permissible Torque | - 11.5 lb-in , 1.3 N·m |
| Variable Speed Range (r/min) | - 3 ~ 53 |
| Permissible Load Inertia | - 2000 oz-in², 370 x 10-4 kg·m² |
| Permissible Overhung Load | - 0.39 in. from Shaft End = 45 lb, 0.79 in. from Shaft End = 67 lb, 10 mm from Shaft End = 200 N, 20 mm from Shaft End = 300 N |
| Permissible Thrust Load | - 9 lb, 40 N |
| Components | - 2IK6UUA-30A [Motor] DSC-U [Speed Controller] |
| RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| Safety Standards | - c-UL, CCC, CE |
| CE Marking | - Low Voltage Directives, EMC Directive |
| Insulation Resistance | - [Controller] 100 MΩ or more when measured by a 500 VDC between the main circuit terminal and the control circuit terminal, between the main circuit terminal and the case and between the main circuit terminal and FG after continuous operation under normal ambient temperature and humidity., [Motor] 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity. |
| Dielectric Strength | - [Controller] Sufficient to withstand 1.9 kVAC at 50 Hz or 60 Hz applied between the main circuit terminal and the control circuit terminal, and between the main circuit terminal and the case, and 1.5 kVAC at 50 Hz or 60 Hz applied between the main circuit terminal and FG for 1 minute after continuous operation under normal ambient temperature and humidity., [Motor] Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity. |
| Temperature Rise | - A gearhead or equivalent heat sink is connected to the motor and the winding temperature rise is measured at 176ºF (80ºC) or less using the resistance change method after rated operation with no load under normal ambient temperature and humidity. |
| Overheat Protection Device | - Impedance Protected |
| Ambient Temperature Range | - [Controller] 32ºF ~ 122ºF (0ºC ~ 50ºC), [Motor] 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| Ambient Humidity | - 85% max. (non-condensing) |
| Altitude | - Max. of 1000 m (3300 ft.) above sea level |
| Thermal Class | - 130 (B) |
| Degree of Protection | - IP20 |
Product options for DSCI26UA-30AV
COMPATIBLE PRODUCTS | |
| Product Line Update | - 6 W (1/125 HP) AC Speed Control Motor and Controller (30:1 Gear Ratio) (Single-Phase 110/115 VAC) - SCM26UA-30A / DSCD6UA |
Product tips for DSCI26UA-30AV
Product announcements for DSCI26UA-30AV
Product documents for DSCI26UA-30AV
| - Connection and Operation | |
| - Product Catalog | |
| - DSC Operating Manual | |
| - 3D CAD (Motor) (*.step) |
