Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for 5IK40UGV-EC
The 5IK40UGV-EC specifies: This item has been discontinued. Contact Technical Support for replacement.
| Product Line | - Oriental Motor® |
| Motor Type | - Induction |
| Frame Size | - 3.54 in, 90 mm |
| Output Power | - 40 W (1/19 HP) |
| Voltage (VAC) | - Single-Phase 220/230 VAC |
| Frequency (Hz) | - 60 |
| Current | - 0.55 A |
| Shaft/Gear Type | - Pinion Shaft (Gearhead required - sold separately) |
| Type | - Cable |
| RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| Safety Standards | - UL, CSA, CCC, CE |
| CE Marking | - Low Voltage Directives |
| Electromagnetic Brake | - Not Equipped |
| Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity. |
| Dielectric Strength | - Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity. |
| Temperature Rise | - A gearhead or equivalent heat sink is connected to the motor and the winding temperature rise is measured at 176ºF (80ºC) or less using the resistance change method after rated operation with no load under normal ambient temperature and humidity |
| Insulation Class | - 130 (B) |
| Overheat Protection | - Built-in Thermal Protector (automatic return type) |
| Ambient Temperature Range | - 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| Ambient Humidity | - 85% max. (non-condensing) |
| Degree of Protection | - IP20 |
