200 W (1/4 HP) Brushless DC Motor - BLM5200HP-AS

Product specifications for BLM5200HP-AS

The BLM5200HP-AS specifies: The BLM Series features a a compact, high-power and high-efficiency brushless DC motor. The entire motor structure features our latest brushless DC motor technology and has been innovated in pursuit of the optimal performance., *Connection Cable Required.,

Motor Type	- Brushless DC Motor
Motor Frame Size	- 3.54 in., 90 mm
Output Power	- 200 W (1/4 HP)
Power Input	- AC
Shaft/Gear Type	- Round Shaft (No Gearhead)
Output Shaft Diameter	- 14 mm
Rated Torque	- 5.625 lb-in, 0.637 N·m
Electromagnetic Brake	- Not Equipped
Variable Speed Range (r/min)	- 80 ~ 4000
Permissible Load Inertia	- 48 oz-in², 8.75 x 10-4 kg·m²
Permissible Radial Load	- 0.39 in. from Shaft End = 33 lb, 0.79 in. from Shaft End = 38 lb, 10 mm from Shaft End = 10 N, 20 mm from Shaft End = 170 N
Permissible Axial Load	- Half of motor mass max.
Components	- BLM5200HP-AS [Motor]
RoHS Compliant	- These products do not contain substances that exceed the regulation values in the RoHS Directive.
Safety Standards	- UL, CSA, CE
CE Marking	- Low Voltage Directives, EMC Directives
Insulation Resistance (Motor)	- 100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity.
Dielectric Strength (Motor)	- Sufficient to withstand 1.5 kVAC at 50 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity.
Temperature Rise (Motor)	- The temperature rise of the windings is 90ºF (50ºC) and that of the case is 72ºF (40ºC) when measured by the thermocouple method after rated continuous operation under normal ambient temperature and humidity.
Ambient Temperature Range	- Motor: 32ºF ~ 104ºF (0ºC ~ 40ºC), nonfreezing Driver: 32ºF ~ 122ºF (0ºC ~ 50ºC)
Ambient Humidity	- 85% or less, noncondensing
Altitude	- Up to 3300 ft (1000 m) above sea level.
Operating Atmosphere	- No corrosive gases or dust. Cannot be used in a radioactive area, magnetic field, vacuum or other special environment.
Thermal Class	- CSA standards: 105 (A), EN standards: 120 (E), UL
Degree of Protection	- Motor: IP66 (excluding installation surface)