60 W (1/12 HP) Brushless DC Motor Speed Control System - BLM460SHPM-10FR

Product specifications for BLM460SHPM-10FR

The BLM460SHPM-10FR specifies: The BLE2 Series features a compact, high-power and high-efficiency brushless DC motor. The entire motor structure features our latest brushless DC motor technology and has been innovated in pursuit of the optimal performance. It is combined with a Driver that can be digitally set and controlled via external DC voltage or by the front panel., Speed Control Range 80~4000 r/min, Torque Limit Function, The Driver can be Digitally Set and Controlled via the Front Panel., *Connection Cable Required.,

Motor Type	- Brushless DC Motor
Motor Frame Size	- 3.15 in., 80 mm
Output Power	- 60 W (1/12 HP)
Power Input	- AC
Shaft/Gear Type	- Hollow Shaft Flat Gearhead
Gear Ratio (X:1)	- 10 :1
Output Shaft Diameter	- 15 mm
Rated Torque	- 15 lb-in, 1.7 N·m
Electromagnetic Brake	- Equipped
Variable Speed Range (r/min)	- 8 ~ 400
Permissible Load Inertia	- 520 oz-in², *When instantaneous stop or instantaneous bi-directional operation is performed = 120 oz-in², 95 x 10-4 kg·m², *When instantaneous stop or instantaneous bi-directional operation is performed = 22 x 10-4 kg·m²
Permissible Radial Load	- 0.39 in. from Shaft End = 180 lb, 0.79 in. from Shaft End = 148 lb, 10 mm from Shaft End = 800 N, 20 mm from Shaft End = 660 N
Permissible Axial Load	- 90 lb, 400 N
Components	- BLM460SHPM-GFV [Motor] GFS4G10FR [Gearhead]
RoHS Compliant	- These products do not contain substances that exceed the regulation values in the RoHS Directive.
Safety Standards	- UL, CSA, CE
CE Marking	- Low Voltage Directives, EMC Directives
Insulation Resistance (Motor)	- 100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity.
Dielectric Strength (Motor)	- Sufficient to withstand 1.5 kVAC at 50 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity.
Temperature Rise (Motor)	- The maximum temperature rise of the windings is 90ºF (50ºC) and that of the case is 72ºF (40ºC) when measured by the thermocouple method after rated continuous operation under normal ambient temperature and humidity.
Ambient Temperature Range	- 32ºF ~ 104ºF (0ºC ~ 40ºC), nonfreezing
Ambient Humidity	- 85% or less, noncondensing
Altitude	- Up to 3300 ft (1000 m) above sea level.
Operating Atmosphere	- No corrosive gases or dust. Cannot be used in a radioactive area, magnetic field, vacuum or other special environment.
Thermal Class	- CSA standards: 105 (A), EN standards: 120 (E), UL
Degree of Protection	- [Motor] IP65 [Driver] IP20
Type	- Connector