120 W (1/6 HP) Brushless DC Motor Speed Control System (50:1 Gear Ratio) (Single-Phase 100-120 VAC) - BXM5120-50FR

Product specifications for BXM5120-50FR

The BXM5120-50FR specifies: The BXII Series brushless DC motor and driver packages offer high performance and high function, now up to 4,000 r/min, for a wide range of applications. The driver is user friendly with easy wiring, data setting and LED display on the front panel and is compact and easy to mount., Speed Control, positioning, torque limiting, Speed Control Range: 2 ~ 4000 r/min (digital setting), 30 ~ 4000 r/min (analog setting), MEXE02 software (free download) or OPX-2A Control Module (sold separately), Motor Connection Cables required* (sold separately),

Motor Type	- Brushless DC Motor
Motor Frame Size	- 3.54 in., 90 mm
Output Power	- 120 W (1/6 HP)
Power Input	- AC
Shaft/Gear Type	- Hollow Shaft Flat Gearhead
Gear Ratio (X:1)	- 50 :1
Output Shaft Diameter	- 20 mm
Rated Torque	- 150 lb-in, 17 N·m
Electromagnetic Brake	- Not Equipped
Permissible Load Inertia	- 25000 oz-in², *When instantaneous stop or instantaneous bi-directional operation is performed = 13700 oz-in², 4500 x 10-4 kg·m², *When instantaneous stop or instantaneous bi-directional operation is performed = 2500 x 10-4 kg·m²
Permissible Radial Load	- 0.39 in. from Shaft End = 330 0.79 in. from Shaft End = 280 lb, 10 mm from Shaft End = 1500 20 mm from Shaft End = 1280 N
Permissible Axial Load	- 112 lb, 500 N
Components	- BXM5120-GFS [Motor], GFS5G50FR [Gearhead]
RoHS Compliant	- These products do not contain substances that exceed the regulation values in the RoHS Directive.
Safety Standards	- UL, CSA, CE
CE Marking	- Low Voltage Directives, EMC Directives
Insulation Resistance (Motor)	- 100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity (except for encoder).
Dielectric Strength (Motor)	- Sufficient to withstand 1.5 kVAC at 50 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity (except for encoder).
Temperature Rise (Motor)	- Temperature rise of the windings is 50ºC (90ºF) max. and that of the case surface is 40ºC (72ºF) max, measured by the thermocouple method after rated continuous operation under normal ambient temperature and humidity.
Ambient Temperature Range	- 32ºF ~ 122ºF (0ºC ~ 50ºC), nonfreezing
Ambient Humidity	- 85% max. (non-condensing)
Altitude	- Max of 10000 ft. (3000 m) above sea level
Operating Atmosphere	- No corrosive gases or dust. Cannot be used in a radioactive area, magnetic field, vacuum, or other special environments.
Thermal Class	- UL/CSA Standards: 105 (A), EN Standards: 120 (E)
Degree of Protection	- IP54 (excluding connectors) [Motor] IP20 [Driver]