400 W (1/2 HP) Brushless DC Motor Speed Control System (100:1 Gear Ratio) (Single-Phase, Three-Phase 200-240 VAC) - BXM6400M-100

Product specifications for BXM6400M-100

The BXM6400M-100 specifies: The BXII Series brushless DC motor and driver packages offer high performance and high function, now up to 4,000 r/min, for a wide range of applications. The driver is user friendly with easy wiring, data setting and LED display on the front panel and is compact and easy to mount., Speed Control, positioning, torque limiting, Speed Control Range: 2 ~ 4000 r/min (digital setting), 30 ~ 4000 r/min (analog setting), MEXE02 software (free download) or OPX-2A Control Module (sold separately), Motor Connection Cables required* (sold separately),

Motor Type	- Brushless DC Motor
Motor Frame Size	- 4.09 in., 104 mm
Output Power	- 400 W (1/2 HP)
Power Input	- AC
Shaft/Gear Type	- Parallel Shaft Gearhead
Gear Ratio (X:1)	- 100 :1
Output Shaft Diameter	- 22 mm
Rated Torque	- 610 lb-in, 70 N·m
Electromagnetic Brake	- Equipped
Permissible Load Inertia	- 98000 oz-in², *When instantaneous stop or instantaneous bi-directional operation is performed = 27000 oz-in², 18000 x 10-4 kg·m², *When instantaneous stop or instantaneous bi-directional operation is performed = 5000 x 10-4 kg·m²
Permissible Radial Load	- 0.39 in. from Shaft End = 220 0.79 in. from Shaft End = 280 lb, 10 mm from Shaft End = 1000 20 mm from Shaft End = 1250 N
Permissible Axial Load	- 90 lb, 400 N
Components	- GFS6G100 [Gearhead], BXM6400M-GFS [Motor]
RoHS Compliant	- These products do not contain substances that exceed the regulation values in the RoHS Directive.
Safety Standards	- UL, CSA, CE
CE Marking	- Low Voltage Directives, EMC Directives
Insulation Resistance (Motor)	- 100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity (except for encoder).
Dielectric Strength (Motor)	- Sufficient to withstand 1.5 kVAC at 50 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity (except for encoder).
Temperature Rise (Motor)	- Temperature rise of the windings is 50ºC (90ºF) max. and that of the case surface is 40ºC (72ºF) max, measured by the thermocouple method after rated continuous operation under normal ambient temperature and humidity.
Ambient Temperature Range	- [Motor] 32ºF ~ 122ºF (0ºC ~ 50ºC), nonfreezing [Driver] 32ºF ~ 72ºF (0ºC ~ 40ºC) when drivers are installed in contact with each other
Ambient Humidity	- 85% max. (non-condensing)
Altitude	- Max of 10000 ft. (3000 m) above sea level
Operating Atmosphere	- No corrosive gases or dust. Cannot be used in a radioactive area, magnetic field, vacuum, or other special environments.
Thermal Class	- UL/CSA Standards: 105 (A), EN Standards: 120 (E)
Degree of Protection	- IP54 (excluding connectors) [Motor] IP20 [Driver]