Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for BLM230HK-10CS
The BLM230HK-10CS specifies: The BLH Series combines a slim, high-power brushless DC motor with a 24 VDC board-type driver to meet your space-saving needs. Speed control range is 100 to 3000 r/min., Analog Driver type, Increased performance (higher torque and reduced noise), Motor, Driver Power Cable and I/O cable required (*sold separately)
| Motor Type | - Brushless DC Motor |
| Motor Frame Size | - 2.36 in., 60 mm |
| Output Power | - 30 W (1/25 HP) |
| Power Input | - DC |
| Shaft/Gear Type | - Hollow Shaft Flat Gearhead |
| Gear Ratio (X:1) | - 10 :1 |
| Output Shaft Diameter | - 8 mm |
| Rated Torque | - 8.8 lb-in, 1 N·m |
| Electromagnetic Brake | - Not Equipped |
| Variable Speed Range (r/min) | - 8 ~ 300 |
| Permissible Load Inertia | - *When instantaneous stop or instantaneous bi-directional operation is performed = 68 oz-in², 520 oz-in², *When instantaneous stop or instantaneous bi-directional operation is performed = 12.4 x 10-4 kg·m², 95 x 10-4 kg·m² |
| Permissible Radial Load | - 0.39 in. from gearhead mounting surface = 112 lb, 0.79 in. from gearhead mounting surface = 90 lb, 10 mm from gearhead mounting surface = 500 N, 20 mm from gearhead mounting surface = 400 N |
| Permissible Axial Load | - 15.7 lb, 70 N |
| RoHS Compliant | - Yes |
| Safety Standards | - UL, CSA, CE |
| CE Marking | - EMC Directives |
| Insulation Resistance (Motor) | - 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after continuous operation under normal ambient temperature and humidity. |
| Dielectric Strength (Motor) | - Sufficient to withstand 0.5 kVAC at 50Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity. |
| Ambient Temperature Range | - 0ºC ~ +50ºC (+32ºF ~ +122ºF) (nonfreezing) |
| Ambient Humidity | - 85% max. (noncondensing) |
| Operating Atmosphere | - No corrosive gases or dust.Cannot be used in radioactive area, magnetic field, vacuum or other special environment. |
| Degree of Protection | - [Motor] IP65 (excluding connectors) |
| Type | - Connector |
