50 W (1/15 HP) Brushless DC Motor Speed Control System (15:1 Gear Ratio) (24 VDC) - BLH450KC-15

Product specifications for BLH450KC-15

The BLH450KC-15 specifies: This product has been discontinued, please contact your local sales office for more information.

Motor Type	- Brushless DC Motor
Motor Frame Size	- 3.15 in., 80 mm
Output Power	- 50 W (1/15 HP)
Power Supply	- 24 VDC
Shaft/Gear Type	- Parallel Shaft Gearhead
Gear Ratio (X:1)	- 15 :1
Output Shaft Diameter	- 15 mm
Rated Torque	- 23 lb-in, 2.7 N·m
Variable Speed Range (r/min)	- 6.7 ~ 200
Permissible Load Inertia	- 1200 oz-in², *When instantaneous stop or instantaneous bi-directional operation is performed = 270 oz-in², 220 x 10-4 kg·m², *When instantaneous stop or instantaneous bi-directional operation is performed = 49.5 x 10-4 kg·m²
Permissible Overhung Load	- 0.39 in. from Shaft End = 67 lb, 0.79 in. from Shaft End = 78 lb, 10 mm from Shaft End = 300 N, 20 mm from Shaft End = 350 N
Permissible Thrust Load	- 22 lb, 100 N
Type	- Cable
Power Input	- DC
Position Control Mode	- No
Torque Limit Control	- No
Vertical Drive (Gravitational Operation)	- No
Max. Extension Length (m)	- 2
Components	- BLHD50K (Driver), BLHM450KC-GFS (Motor), GFS4G15 (Gearhead)
RoHS Compliant	- Yes
Safety Standards	- UL, CSA, CE
CE Marking	- EMC Directives
Insulation Class	- UL, CSA: Class A [105ºC (221ºF)] EN: Class E [120ºC (248ºF)]
Insulation Resistance (Motor)	- 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after continuous operation under normal ambient temperature and humidity.
Insulation Resistance (Driver)	- 100 M Ω or more when 500 VDC megger is applied between the power supply terminal and heat radiation plate after continuous operation under normal ambient temperature and humidity.
Dielectric Strength (Motor)	- Sufficient to withstand 0.5 kVAC at 50Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity.
Dielectric Strength (Driver)	- Sufficient to withstand 0.5 kVAC at 50Hz applied between the power supply terminal and the heat radiation plate for 1 minute after continuous operation under normal ambient temperature and humidity.
Ambient Temperature Range	- 0ºC ~ +50ºC (+32ºF ~ +122ºF) (nonfreezing)
Ambient Humidity	- 85% max. (noncondensing)
Operating Atmosphere	- No corrosive gases or dust.Cannot be used in radioactive area, magnetic field, vacuum or other special environment.
Degree of Protection	- [Motor] IP65 (excluding connectors), [Driver] IP00