400 W (1/2 HP) Brushless DC Gear Motor Speed Control System - BLV640NM30F-3

Product specifications for BLV640NM30F-3

The BLV640NM30F-3 specifies: The BLV Series brushless DC gear motor (BLDC motor) speed control system offers high performance and simple operation from a compact motor and driver., Slim, Yet Powerful Design, Wide Speed Range, DC Input, Battery drive function, Communication through I/O or RS-485 available,

Motor Type	- Brushless DC Motor
Motor Frame Size	- 4.09 in., 104 mm
Output Power	- 400 W (1/2 HP)
Power Supply	- 48 VDC
Shaft/Gear Type	- Hollow Shaft Flat Gearhead
Gear Ratio (X:1)	- 30 :1
Output Shaft Diameter	- 25 mm
Rated Torque	- 290 lb-in, 33.20 N·m
Electromagnetic Brake	- Equipped
Brake Type	- Power off activated type, automatically controlled by the driver.
Static Friction Torque	- 184 oz-in
Cable Length (Included)	- 3 m (9.8 ft)
Control Module Included	- No
Variable Speed Range (r/min)	- 3.3 ~ 133
Permissible Load Inertia	- 21000 oz-in², *When instantaneous stop or instantaneous bi-directional operation is performed = 9800 oz-in², 3900 x 10-4 kg·m², *When instantaneous stop or instantaneous bi-directional operation is performed = 1800 x 10-4 kg·m²
Permissible Overhung Load	- 0.39 in. from gearhead mounting surface = 450 lb, 0.79 in. from gearhead mounting surface = 400 lb, 10 mm from gearhead mounting surface = 2040 N, 20 mm from gearhead mounting surface = 1780 N
Permissible Thrust Load	- 180 lb, 800 N
Type	- Cable
Speed Control Method (Select one of the following)	- Internal potentiometer, External DC voltage, External potentiometer (20kΩ, 1/4W)
Number of Speed Settings	- 2
Multi-Speed Setting Method	- 2 Speeds: 1 speed set by the internal speedpotentiometer and 1 speed set by the externalanalog setting
Instantaneous Stop	- Yes
Multi-Axes Control	- Yes
Alarm Output	- Yes
Power Input	- DC
Max. Extension Length (m)	- 3.5
Components	- GFS6G30FR (Gearhead), BLVD40NM (Driver), BLVM640NM-GFS (Motor)
RoHS Compliant	- Yes
Safety Standards	- CE
CE Marking	- EMC Directives
Insulation Class	- [Motor] EN: Class E [120ºC (248ºF)]
Insulation Resistance (Motor)	- 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after continuous operation under normal ambient temperature and humidity.
Insulation Resistance (Driver)	- 100 M Ω or more when 500 VDC megger is applied between the power supply terminal and heat radiation plate after continuous operation under normal ambient temperature and humidity.
Dielectric Strength (Motor)	- Sufficient to withstand 0.5 kVAC at 50Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity.
Dielectric Strength (Driver)	- Sufficient to withstand 0.5 kVAC at 50Hz applied between the power supply terminal and the heat radiation plate for 1 minute after continuous operation under normal ambient temperature and humidity.
Ambient Temperature Range	- 0ºC ~ +40ºC (+32ºF ~ +104ºF) (nonfreezing)
Ambient Humidity	- 85% max. (noncondensing)
Operating Atmosphere	- No corrosive gases or dust.Cannot be used in radioactive area, magnetic field, vacuum or other special environment.
Degree of Protection	- [Motor] IP40, [Driver] IP20