Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for BLM5120HP-GFV
The BLM5120HP-GFV specifies: Pinion shaft motor for use with a gearhead (sold separately)., *Pinion Shaft not shown.
| Product Line | - Oriental Motor® |
| Motor Type | - Brushless DC Motor |
| Frame Size | - 3.54 in, 90 mm |
| Output Power | - 120 W (1/6 HP) |
| Shaft/Gear Type | - Pinion Shaft (Gearhead required - sold separately) |
| RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| Safety Standards | - UL, CSA, CE |
| CE Marking | - Low Voltage Directives |
| Electromagnetic Brake | - Not Equipped |
| Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity. |
| Dielectric Strength | - Sufficient to withstand 1.5 kVAC at 50 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity. |
| Temperature Rise | - The temperature rise of the windings is 90ºF (50ºC) and that of the case is 72ºF (40ºC) when measured by the thermocouple method after rated continuous operation under normal ambient temperature and humidity. |
| Ambient Temperature Range | - Motor: 32ºF ~ 104ºF (0ºC ~ 40ºC), nonfreezing Driver: 32ºF ~ 122ºF (0ºC ~ 50ºC) |
| Ambient Humidity | - 85% or less, noncondensing |
| Degree of Protection | - IP66 (excluding mounting surface) |
