Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for AR24SAK-3
The AR24SAK-3 specifies: This package part number has been discontinued. We are now offering these as component products., Please contact your local sales office for updated part numbers.
| Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Motor Type | - Closed Loop | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Frame Size | - 1.1 in, 28 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Motor Length | - 1.77 in., 45 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Speed-Torque Characteristics | - Holding Torque Holding Torque | - 7.8 oz-in, 0.055 N·m | Shaft/Gear Type | - Round Shaft (No Gearhead) | Feedback Device (Motor) | - Resolver | Electromagnetic Brake | - Not Equipped | Shaft | - Single | Power Supply | - 24 VDC | Current | - 0.9 A | Resolution (Resolution Setting: 1000 P/R) | - 0.36 °/Pulse | Rotor Inertia | - 0.06 oz-in², 11x10-7 kg·m² | RoHS Compliant | - Yes | Safety Standards | - CE | CE Marking | - EMC Directives | Components | - ARM24SAK [Motor], ARD-K [Driver] | Maximum Input Pulse Frequency | - When the host controller is a line driver output: 500 kHz (When pulse duty is 50%) | When the host controller is an open-collector output: 250 kHz (When pulse duty is 50%)* *When driver cable CC36D1-1 is used. Control Command | - Pulse input | Insulation Class | - [Motor] Class B [130ºC (266ºF)] | Insulation Resistance (Motor) | - 100 MΩ or more when 500 VDC megger is applied between the following places: | Case - Motor and sensor windings Dielectric Strength (Motor) | - Sufficient to withstand the following for 1 minute: | Case - Motor and sensor windings 1.0 kVAC 50 Hz or 60 Hz Ambient Temperature (Motor) | - -10 ~ 50ºC (14 ~ 122º) (non-freezing) | (when a heat sink of a capacity at least equivalent to an aluminum plate with a size of 3.94 x 3.94 in., 0.24 in. thick is installed.) Ambient Temperature (Driver) | - 0 ~ 50ºC (32 ~ 122ºF) (non-freezing) | Ambient Humidity | - 85% or less (Non-condensing) | Operating Atmosphere | - No corrosive gases, dust water or oil | Degree of Protection | - [Motor] IP20 | [Driver] IP20 Stop Position Accuracy | - ±4 arc minutes (±0.067º) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | Radial Load | - 0 in. from Shaft End = 5.6 lb, 0.2 in. from Shaft End = 7.6 lb, 0.39 in. from Shaft End = 11.7 lb, 0 mm from Shaft End = 25 N, 5 mm from Shaft End = 34 N, 10 mm from Shaft End = 52 N | Axial Load | - 1.1 lb, 5 N | |
Product options for AR24SAK-3
Product tips for AR24SAK-3
Product announcements for AR24SAK-3
Product documents for AR24SAK-3
| - Connection and Operation | |
| - Product Catalog | |
| - AR Series User Manual | |
| - Driver CAD 2D (DXF) | |
| - Motor CAD 2D (DXF) | |
| - 3D CAD (*.step) |
