200 W (1/4 HP) Tuning-Free Servo Motor & Driver - NX620MC-3

Product specifications for NX620MC-3

The NX620MC-3 specifies: The NX Series is a motor, driver and electromagnetic brake solution in one package. Planetary geared options are also available and come pre-assembled. Each package features a high performance servo system with 4 control modes and is capable of high accuracy control. Smooth operation can be achieved in high inertia loads or belt drive applications without manual tuning. 3 meter (9.8 ft.) motor and encoder cables are included. Shorter or longer cables sold separately.Four Control Modes are included:, Positioning, Speed (Max. 5,500 rpm), Torque, Tension,

Product Line	- Oriental Motor®
Rated Output Power	- 200 W (1/4 HP)
Speed-Torque Characteristics	-
Max Speed (rpm)
Max Speed (rpm)	- 5500
Rated Speed (rpm)	- 3000
Resolution (P/R)	- 100 to 100000 (Factory setting 1000)
Detector	- Absolute Encoder 1 rotation 20 bits, multiple rotations 16 bits
Gear Type - Search	- Round Shaft (No Gear)
Electromagnetic Brake	- Equipped
Power Input	- Single-Phase 200-230 VAC Three-Phase 200-230 VAC
Voltage and Frequency	- -15% to +10% 50/60 Hz
DC Control Power Supply	- 24 VDC ±10% 0.8 A
Rated Input Current	- 2.8 A (Single-Phase) 1.6 A (Three-Phase)
Brake Type	- Power Off Activated Type
Brake Power Supply	- 24 VDC ±10%
Power Consumption	- 7.2 W
Excitation Current	- 0.3 A
Components	- NXD20-C (Driver), NXM620M (Motor)
Thermal Class	- [Motor] 130 (B)
Insulation Resistance (Motor)	- 100 MΩ min. when measured with a 500 VDC megger between the following locations: Case - Motor Windings Case - Electromagnetic Brake Windings
Insulation Resistance (Driver)	- 100 MΩ min when measured with a 500 VDC megger between the following locations: PE terminal AC Main Power Supply Connector, Motor Connector DC Control Power Supply Connector, I/O Connector, Encoder Connector, Control
Dielectric Voltage (Motor)	- No abnormality is judged with the following application for 1 minute: Case - Motor Windings 1.5 kVAC 50 Hz or 60 Hz Case - Electromagnetic Brake Windings 1.0 kVAC 50 Hz or 60 Hz
Dielectric Voltage (Driver)	- No abnormality is judged with the following application for 1 minute: PE terminal ? AC Main Power Supply Connector, Motor Connector 1.5 kVAC 50 Hz or 60 Hz DC Control Power Supply Connector, I/O Connector, Encoder Connector, Con
Ambient Temperature (Motor)	- 0 ~ +40ºC (32 ~ 104ºF) (non-freezing)
Ambient Temperature (Driver)	- 0 ~ +50ºC (32 ~ 122ºF) (non-freezing)
Ambient Humidity	- 85% max. (non-condensing)
Operating Atmosphere	- [Motor] No corrosive gases. Must not be exposed to oil or other liquids. [Driver] No corrosive gases or dust. The product should not be exposed to water, oil or other liquids.
Degree of Protection	- [Motor]IP65 (excluding installation surface and connector locations.) [Driver] IP20
Shaft Runout	- 0.05 mm (0.002 in.) T.I.R.
Concentricity	- 0.075 mm (0.003 in.) T.I.R.
Perpendicularity	- 0.075 mm (0.003 in.) T.I.R.
Safety Standards	- CE UL/CSA