50 W (1/15 HP) Tuning-Free Servo Motor & Driver - NX65MC-PS10-3

Product specifications for NX65MC-PS10-3

The NX65MC-PS10-3 specifies: The NX Series is a motor, driver, gearhead and electromagnetic brake solution in one package. Each package features a high performance servo system with four control modes and is capable of high accuracy control. Smooth operation can be achieved in high inertia loads or belt drive applications without manual tuning. 3 meter (9.8 ft.) motor and encoder cables are included. Shorter or longer cables sold separately.Four Control Modes are included:, Positioning, Speed (Max. 5,500 rpm), Torque, Tension,

Product Line	- Oriental Motor®
Rated Output Power	- 50 W (1/15 HP)
Speed-Torque Characteristics	-
Permissible Speed Range
Permissible Speed Range	- 0 ~ 300 r/min
Resolution (P/R)	- 100 to 100000 (Factory setting 1000)
Detector	- Absolute Encoder 1 rotation 20 bits, multiple rotations 16 bits
Gear Type - Search	- Planetary Gear
Gear Ratio (X:1)	- 10 :1
Electromagnetic Brake	- Equipped
Power Input	- Single-Phase 200-230 VAC Three-Phase 200-230 VAC
Voltage and Frequency	- -15% to +10% 50/60 Hz
DC Control Power Supply	- 24 VDC ±10% 0.8 A
Rated Input Current	- 1.2 A (Single-Phase) 0.7 A (Three-Phase)
Brake Type	- Power Off Activated Type
Brake Power Supply	- 24 VDC ±10%
Power Consumption	- 6.1 W
Excitation Current	- 0.25 A
Backlash	- 15
Components	- NXD20-C (Driver), NXM65M-PS10 (Motor)
Thermal Class	- [Motor] 130 (B)
Insulation Resistance (Motor)	- 100 MΩ min. when measured with a 500 VDC megger between the following locations: Case - Motor Windings Case - Electromagnetic Brake Windings
Insulation Resistance (Driver)	- 100 MΩ min when measured with a 500 VDC megger between the following locations: PE terminal AC Main Power Supply Connector, Motor Connector DC Control Power Supply Connector, I/O Connector, Encoder Connector, Control
Dielectric Voltage (Motor)	- No abnormality is judged with the following application for 1 minute: Case - Motor Windings 1.5 kVAC 50 Hz or 60 Hz Case - Electromagnetic Brake Windings 1.0 kVAC 50 Hz or 60 Hz
Dielectric Voltage (Driver)	- No abnormality is judged with the following application for 1 minute: PE terminal ? AC Main Power Supply Connector, Motor Connector 1.5 kVAC 50 Hz or 60 Hz DC Control Power Supply Connector, I/O Connector, Encoder Connector, Con
Ambient Temperature (Motor)	- 0 ~ +40ºC (32 ~ 104ºF) (non-freezing)
Ambient Temperature (Driver)	- 0 ~ +50ºC (32 ~ 122ºF) (non-freezing)
Ambient Humidity	- 85% max. (non-condensing)
Operating Atmosphere	- [Motor] No corrosive gases. Must not be exposed to oil or other liquids. [Driver] No corrosive gases or dust. The product should not be exposed to water, oil or other liquids.
Degree of Protection	- [Motor]IP65 (excluding installation surface and connector locations.) [Driver] IP20
Shaft Runout	- 0.05 mm (0.002 in.) T.I.R.
Concentricity	- 0.075 mm (0.003 in.) T.I.R.
Perpendicularity	- 0.075 mm (0.003 in.) T.I.R.
Safety Standards	- CE UL/CSA