Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for NXM1075A-J10
The NXM1075A-J10 specifies: This product has been discontinued, please contact your local sales office for more information.
| Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||||
| Motor Frame Size | - 4.09 in., 104 mm | |||||||||||||||||||||||||||||||||||||||||||||||
| Rated Output Power | - 750 W (1 HP) | |||||||||||||||||||||||||||||||||||||||||||||||
| Speed-Torque Characteristics | - Rated Torque Rated Torque | - 2710 oz-in, 19.1 N·m | Permissible Speed Range | - 0 ~ 300 r/min | Max Instantaneous Torque | - 8130 oz-in, 57.3 N·m | Rotor Inertia | - 5.1 oz-in², 0.291x10-4 kg·m² | Resolution (P/R) | - 100 to 100000 (Factory setting 1000) | Detector | - Absolute Encoder | 1 rotation 20 bits, multiple rotations 16 bits Gear Type - Search | - Planetary Gear | Gear Ratio (X:1) | - 10 :1 | Electromagnetic Brake | - Not Equipped | Backlash | - 12 arc min | Permissible Overhung Load | - 0 in. from Shaft End = 200 lb, 0.2 in. from Shaft End = 210 lb, 0.39 in. from Shaft End = 220 lb, 0.59 in. from Shaft End = 230 lb, 0.79 in. from Shaft End = 240 lb, 0.98 in. from Shaft End = 260 lb, 1.18 in. from Shaft End = 270 lb, 1.38 in. from Shaft End = 290 lb, 0 mm from Shaft End = 900 N, 10 mm from Shaft End = 1000 N, 15 mm from Shaft End = 1050 N, 20 mm from Shaft End = 1100 N, 25 mm from Shaft End = 1180 N, 30 mm from Shaft End = 1230 N, 35 mm from Shaft End = 1300 N, 5 mm from Shaft End = 950 N | Permissible Thrust Load | - 146 lb, 650 N | Thermal Class | - 130 (B) | Insulation Resistance (Motor) | - 100 MΩ min. when measured with a 500 VDC megger between the following locations: | Case - Motor Windings Dielectric Voltage (Motor) | - No abnormality is judged with the following application for 1 minute: | Case - Motor Windings 1.5 kVAC 50 Hz or 60 Hz Ambient Temperature (Motor) | - 0 ~ +40ºC (32 ~ 104ºF) (non-freezing) | Ambient Humidity | - 85% max. (non-condensing) | Operating Atmosphere | - No corrosive gases. Must not be exposed to oil or other liquids. | Degree of Protection | - IP65 (excluding installation surface and connector locations.) | Shaft Runout | - 0.05 T.I.R. (mm) | Concentricity | - 0.075 T.I.R. (mm) | Perpendicularity | - 0.075 T.I.R. (mm) | Safety Standards | - CE | UL/CSA |
Product options for NXM1075A-J10
Product tips for NXM1075A-J10
Product announcements for NXM1075A-J10
Product documents for NXM1075A-J10
| - Product Catalog | |
| - NX Series Motor Operating Manual | |
| - Motor CAD 2D (DXF) |
