Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for NX975MS-3
The NX975MS-3 specifies: The NX Series is a motor, driver and electromagnetic brake solution in one package. Planetary geared options are also available and come pre-assembled. Each package features a high performance servo system with 4 control modes and is capable of high accuracy control. Smooth operation can be achieved in high inertia loads or belt drive applications without manual tuning. 3 meter (9.8 ft.) motor and encoder cables are included. Shorter or longer cables sold separately.Four Control Modes are included:, Positioning, Speed (Max. 5,500 rpm), Torque, Tension,
| Product Line | - Oriental Motor® |
| Rated Output Power | - 750 W (1 HP) |
| Speed-Torque Characteristics | - |
Max Speed (rpm) | |
| Max Speed (rpm) | - 5500 |
| Rated Speed (rpm) | - 3000 |
| Resolution (P/R) | - 100 to 100000 (Factory setting 1000) |
| Detector | - Absolute Encoder 1 rotation 20 bits, multiple rotations 16 bits |
| Gear Type - Search | - Round Shaft (No Gear) |
| Electromagnetic Brake | - Equipped |
| Power Input | - Three-Phase 200-230 VAC |
| Voltage and Frequency | - -15% to +10% 50/60 Hz |
| DC Control Power Supply | - 24 VDC ±10% 0.8 A |
| Rated Input Current | - 4.7 A |
| Brake Type | - Power Off Activated Type |
| Brake Power Supply | - 24 VDC ±10% |
| Power Consumption | - 8.5 W |
| Excitation Current | - 0.35 A |
| Components | - NXD75-S (Driver), NXM975M (Motor) |
| Thermal Class | - [Motor] 130 (B) |
| Insulation Resistance (Motor) | - 100 MΩ min. when measured with a 500 VDC megger between the following locations: Case - Motor Windings Case - Electromagnetic Brake Windings |
| Insulation Resistance (Driver) | - 100 MΩ min when measured with a 500 VDC megger between the following locations:
|
| Dielectric Voltage (Motor) | - No abnormality is judged with the following application for 1 minute: Case - Motor Windings 1.5 kVAC 50 Hz or 60 Hz Case - Electromagnetic Brake Windings 1.0 kVAC 50 Hz or 60 Hz |
| Dielectric Voltage (Driver) | - No abnormality is judged with the following application for 1 minute:
|
| Ambient Temperature (Motor) | - 0 ~ +40ºC (32 ~ 104ºF) (non-freezing) |
| Ambient Temperature (Driver) | - 0 ~ +50ºC (32 ~ 122ºF) (non-freezing) |
| Ambient Humidity | - 85% max. (non-condensing) |
| Operating Atmosphere | - [Motor] No corrosive gases. Must not be exposed to oil or other liquids. [Driver] No corrosive gases or dust. The product should not be exposed to water, oil or other liquids. |
| Degree of Protection | - [Motor]IP65 (excluding installation surface and connector locations.) [Driver] IP20 |
| Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. |
| Concentricity | - 0.075 mm (0.003 in.) T.I.R. |
| Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. |
| Safety Standards | - CE UL/CSA |
Product options for NX975MS-3
Product tips for NX975MS-3
Product announcements for NX975MS-3
Product documents for NX975MS-3
| - Product Catalog | |
| - NX Series User Manual | |
| - Motor CAD 2D (DXF) | |
| - Driver CAD 2D (DXF) | |
| - 3D CAD (*.step) |
