2.36 in. (60 mm) 5-Phase Stepper Motor - PKP566FN24AW

Product specifications for PKP566FN24AW

The PKP566FN24AW specifies: The High-Torque, high-performance stepper motor offers superior performance, high torque while providing low vibration and low noise. Basic step angle is 0.72º (500 steps per rev)., DC Driver input type motor only,

Frame Size	- 2.36 in, 60 mm
Motor Length	- 2.26 in., 57.50 mm
Basic Step Angle	- 0.72º
Speed-Torque Characteristics	-
Holding Torque
Holding Torque	- 134 oz-in, 0.95 N·m
Current per Phase	- 2.4 A/phase
Type	- High-Torque
Shaft/Gear Type	- Round Shaft (No Gearhead)
Gear Type	- No Gearhead
Motor Connection Type	- Flying Leads
Shaft	- Single
Step Angle	- 0.72 °
Connection Type	- New Pentagon (Bipolar)
Lead Wires	- 5
Rotor Inertia	- 1.53 oz-in², 280x10-7 kg·m²
RoHS Compliant	- Yes
Safety Standards	- CE
Shaft Runout	- 0.05 mm (0.002 in.) T.I.R.
Concentricity	- 0.075 mm (0.003 in.) T.I.R.
Perpendicularity	- 0.075 mm (0.003 in.) T.I.R.
Radial Play	- 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.)
Axial Play	- 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.)
Radial Load	- 0 in. from Shaft End = 14.1 lb, 0.2 in. from Shaft End = 16.8 lb, 0.39 in. from Shaft End = 21 lb, 0.59 in. from Shaft End = 29 lb, 0.79 in. from Shaft End = 42 lb, 0 in. from Shaft End = 63 N, 0.2 in. from Shaft End = 75 N, 0.39 in. from Shaft End = 95 N, 0.59 in. from Shaft End = 130 N, 0.79 in. from Shaft End = 190 N
Axial Load	- 4.5 lb, 20 N