Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for PK564AWM
The PK564AWM specifies: High-performance stepper motor offers superior performance, high torque, low vibration and low noise. Basic step angle is 0.72º (500 steps per rev)., Electromagnetic Brake Type, ,
| Frame Size | - 2.36 in, 60 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Motor Length | - 3.48 in., 88.5 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Basic Step Angle | - 0.72º | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Speed-Torque Characteristics | - Holding Torque Holding Torque | - 59 oz-in, 0.42 N·m | Current per Phase | - 1.4 A/phase | Type | - Standard | Shaft/Gear Type | - Round Shaft (No Gearhead) | Gear Type | - No Gearhead | Motor Connection Type | - Flying Leads | Shaft | - Single | Step Angle | - 0.72 ° | Connection Type | - New Pentagon (Bipolar) | Lead Wires | - 5 | Rotor Inertia | - 1.83 oz-in², 335x10-7 kg·m² | RoHS Compliant | - Yes | Safety Standards | - EN, CE | Insulation Resistance | - 100 MΩ minimum under normal temperature and humidity, when measured by a 500 VDC megger between the windings and the motor casing. | Dielectric Strength | - Sufficient to withstand 1.5 kV, 50 Hz or 60 Hz applied for one minute between the windings and casing, under normal temperature and humidity. | Temperature Rise | - Temperature rise of the coil measured by the Change Resistance Method is 176ºF (80ºC) or less (at rated current, at standstill, five phases energized). | Insulation Class | - Class B [266ºF (130ºC)], Recognized as Class A 221ºF (105ºC) by UL standard | Ambient Temperature Range | - 14ºF ~ 122ºF (-10ºC ~ 50ºC) (nonfreezing) | Ambient Humidity | - 85% or less (noncondensing) | Shaft Runout | - 0.002 in. (0.05 mm) T.I.R. at top of output shaft | Concentricity | - 0.003 in. (0.075 mm) T.I.R. | Perpendicularity | - 0.003 in. (0.075 mm) T.I.R. | Radial Play | - 0.001 in. (0.025 mm) max. of 1.12 lb. (5 N) | Axial Play | - 0.003 in. (0.075 mm) max. of 2.2 lb. (10 N) | Radial Load | - 0 in. from Shaft End = 14.1 lb, 0.2 in. from Shaft End = 16.8 lb, 0.39 in. from Shaft End = 21 lb, 0.59 in. from Shaft End = 29 lb, 0.79 in. from Shaft End = 42 lb, 0 mm from Shaft End = 63 N, 5 mm from Shaft End = 75 N, 10 mm from Shaft End = 95 N, 15 mm from Shaft End = 130 N, 20 mm from Shaft End = 190 N | Axial Load | - 4.5 lb, 20 N | |
