Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for PK564AWR27LT3.6
The PK564AWR27LT3.6 specifies: This product has been discontinued, please contact your local sales office for more information.
Frame Size | - 2.36 in, 60 mm |
Motor Length | - 3.68 in., 93.5 mm |
Basic Step Angle | - 0.72º |
Speed-Torque Characteristics | - |
Holding Torque | |
Holding Torque | - 176 oz-in, 1.25 N·m |
Current per Phase | - 1.4 A/phase |
Type | - Geared |
Shaft/Gear Type | - Taper Hobbed Gear |
Gear Ratio (X:1) | - 3.6 :1 |
Gear Type | - Taper Hobbed, Low Backlash (up to 45 arc min), Offset Shaft |
Backlash | - 15 arcmin (0.25º) |
Motor Connection Type | - Flying Leads |
Shaft | - Single |
Step Angle | - 0.20 ° |
Connection Type | - New Pentagon (Bipolar) |
Lead Wires | - 5 |
Rotor Inertia | - 0.96 oz-in², 175x10-7 kg·m² |
RoHS Compliant | - Yes |
Safety Standards | - EN, CE |
Insulation Resistance | - 100 MΩ minimum under normal temperature and humidity, when measured by a 500 VDC megger between the windings and the motor casing. |
Dielectric Strength | - Sufficient to withstand 1.5 kV, 50 Hz or 60 Hz applied for 1 minute between the windings and casing under normal temperature and humidity. |
Temperature Rise | - Temperature rise of the coil measured by the Change Resistance Method is 176ºF (80ºC) or less (at rated current, at standstill, five phases energized). |
Insulation Class | - [Motor] Class B [266ºF (130ºC)] |
Ambient Temperature Range | - [Motor] 14ºF ~ 122ºF (-10ºC ~ 50ºC) (nonfreezing) |
Ambient Humidity | - 85% or less (noncondensing) |
Shaft Runout | - 0.002 in. (0.05 mm) T.I.R. at top of output shaft |
Concentricity | - 0.003 in. (0.075 mm) T.I.R. |
Perpendicularity | - 0.003 in. (0.075 mm) T.I.R. |
Radial Play | - 0.001 in. (0.025 mm) max. of 1.12 lb. (5 N) |
Axial Play | - 0.003 in. (0.075 mm) max. of 2.2 lb. (10 N) |
Radial Load | - 0 in. from Shaft End = 15.7 lb, 0.2 in. from Shaft End = 18 lb, 0.39 in. from Shaft End = 22 lb, 0.59 in. from Shaft End = 27 lb, 0.79 in. from Shaft End = 33 lb, 0 mm from Shaft End = 70 N, 5 mm from Shaft End = 80 N, 10 mm from Shaft End = 100 N, 15 mm from Shaft End = 120 N, 20 mm from Shaft End = 150 N |
Axial Load | - 9 lb, 40 N |