Motor Type | - 5-Phase |
Frame Size | - 1.65 in, 42 mm |
Motor Length | - 1.3 in., 33 mm |
Speed-Torque Characteristics | - |
Holding Torque |
Holding Torque | - 18.4 oz-in, 0.13 N·m |
Type | - Standard |
Shaft/Gear Type | - Round Shaft (No Gearhead) |
Gear Type | - No Gearhead |
Shaft | - Single |
Power Supply | - 24 VDC |
Current | - 1.4 A |
Basic Step Angle | - 0.72º |
Rotor Inertia | - 0.191 oz-in², 35x10-7 kg·m² |
RoHS Compliant | - Yes |
Safety Standards | - UL, CSA, CE |
CE Marking | - EMC Directives |
Components | - PK543NAW (Motor), CRD5107P (Driver) |
Insulation Resistance | - [Motor] 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength | - [Motor] Sufficient to withstand 1.0 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity. |
Insulation Class | - [Motor] Class B [266ºF (130ºC)], Recognized as Class A 221ºF (105ºC) by UL standard |
Ambient Temperature Range | - [Driver] 32ºF ~ 104ºF (0ºC ~ 40ºC) (nonfreezing), [Motor] 14ºF ~ 122ºF (-10ºC ~ 50ºC) (nonfreezing) |
Ambient Humidity | - 85% or less (noncondensing) |
Operating Atmosphere | - No corrosive gases, dust, water or oil. |
Temperature Rise | - [Motor] Temperature rise of the coil measured by the Change Resistance Method is 176ºF (80ºC) or less (at rated current, at standstill, five phases energized). |
Shaft Runout | - 0.002 in (0.05 mm) T.I.R. at top of output shaft |
Concentricity | - 0.003 in. (0.075 mm) T.I.R. |
Perpendicularity | - 0.003 in. (0.075 mm) T.I.R. |
Stop Position Accuracy | - ±5 arc minutes (±0.084º) |
Radial Play | - 0.001 inch (0.025 mm) max. of 1.12 lb. (5 N) |
Axial Play | - 0.003 in (0.075 mm) max. of 2.2 lb. (10 N) |
Radial Load | - 0 in. from Shaft End = 4.5 lb, 0.2 in. from Shaft End = 5.6 lb, 0.39 in. from Shaft End = 7.6 lb, 0.59 in. from Shaft End = 11.7 lb, 0 mm from Shaft End = 20 N, 5 mm from Shaft End = 25 N, 10 mm from Shaft End = 34 N, 15 mm from Shaft End = 52 N |
Axial Load | - 2.2 lb, 10 N |