Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for AZ66AC-PS25
The AZ66AC-PS25 specifies: This package part number has been discontinued. We are now offering these as component products., Please contact your local sales office for updated part numbers.
| Product Line | - Oriental Motor® |
| Frame Size | - 2.36 in, 60 mm |
| Motor Length | - 4.88 in., 124 mm |
| Speed-Torque Characteristics | - |
Holding Torque | |
| Holding Torque | - 1132 oz-in, 8 N·m |
| Type | - Absolute Sensor Type |
| Shaft/Gear Type | - Planetary Gear |
| Gear Ratio (X:1) | - 25 :1 |
| Backlash | - 35 arc min |
| Feedback Device (Motor) | - Absolute Mechanical Sensor |
| Shaft | - Single |
| Electromagnetic Brake | - Not Equipped |
| Power Supply | - Single-Phase/Three-Phase 200-240 VAC |
| Current | - 1.4 A [Three-Phase], 2.3 A [Single-Phase] |
| Resolution (Resolution Setting: 1000 P/R) | - 0.0144 °/Pulse |
| Permissible Speed Range (r/min) | - 0 ~ 120 |
| Rotor Inertia | - 2 oz-in², 370x10-7 kg·m² |
| Control Power Supply | - 24 VDC ± 5%, 0.25 A |
| RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| Safety Standards | - UL, CE |
| CE Marking | - Low Voltage Directives, EMC Directives |
| Power Removal Function | - Emergency Torque Off (ETO) Function |
| Components | - AZD-C [Driver], AZM66AC-PS25 [Motor] |
| Degree of Protection | - [Motor] IP66 (excluding the mounting surface and connector) [Driver] IP20 |
| Stop Position Accuracy | - ±5 arc minutes (±0.084º) |
| Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. |
| Concentricity | - 0.075 mm (0.003 in.) T.I.R. |
| Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. |
| Radial Load | - 0 in. from Shaft End = 74 lb, 0.2 in. from Shaft End = 81 lb, 0.39 in. from Shaft End = 90 lb, 0.59 in. from Shaft End = 101 lb, 0.79 in. from Shaft End = 117 lb, 0 mm from Shaft End = 330 N, 5 mm from Shaft End = 360 N, 10 mm from Shaft End = 400 N, 15 mm from Shaft End = 450 N, 20 mm from Shaft End = 520 N |
| Axial Load | - 22 lb, 100 N |
