Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for AZ46AAD-TS7.2
The AZ46AAD-TS7.2 specifies: This package part number has been discontinued. We are now offering these as component products., Please contact your local sales office for updated part numbers.
Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Frame Size | - 1.65 in, 42 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 3.98 in., 101 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 170 oz-in, 1.20 N·m | Type | - Absolute Sensor Type | Shaft/Gear Type | - Taper Hobbed Gear | Gear Ratio (X:1) | - 7.2 :1 | Backlash | - 10 arc min (0.17º) | Feedback Device (Motor) | - Absolute Mechanical Sensor | Shaft | - Single | Electromagnetic Brake | - Not Equipped | Power Supply | - Single-Phase 100-120 VAC | Current | - 2.7 A | Resolution (Resolution Setting: 1000 P/R) | - 0.05 °/Pulse | Permissible Speed Range (r/min) | - 0 ~ 416 | Rotor Inertia | - 0.30 oz-in², 55x10-7 kg·m² | Control Power Supply | - 24 VDC ± 5%, 0.25 A | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Safety Standards | - UL, CE | CE Marking | - Low Voltage Directives, EMC Directives | Power Removal Function | - STO - (ETO)Safety Torque Off Function | Components | - AZM46AC-TS7.2 [Motor], AZD-AD [Driver] | Degree of Protection | - [Motor] IP66 (excluding the mounting surface and connector) | [Driver] IP10 Stop Position Accuracy | - ±4 arc minutes (±0.067º) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | Radial Load | - 0 in. from Shaft End = 4.5 lb, 0.2 in. from Shaft End = 6.7 lb, 0.39 in. from Shaft End = 9 lb, 0.59 in. from Shaft End = 11.2 lb, 0 mm from Shaft End = 20 N, 5 mm from Shaft End = 30 N, 10 mm from Shaft End = 40 N, 15 mm from Shaft End = 50 N | Axial Load | - 3.3 lb, 15 N | |