Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for AZM24AKW-HS100
| Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Frame Size | - 1.18 in, 30 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Motor Length | - 3.11 in., 79 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Driver Voltage Input Power | - DC | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Speed-Torque Characteristics | - Holding Torque Holding Torque | - 340 oz-in, 2.4 N·m | Type | - Absolute Mechanical Encoder | Shaft/Gear Type | - Harmonic Gear | Gear Ratio (X:1) | - 100 :1 | Lost Motion | - 1.5 max | Shaft | - Single | Electromagnetic Brake | - Not Equipped | Resolution (Resolution Setting: 1000 P/R) | - 0.0036 °/Pulse | Permissible Speed Range (r/min) | - 0 ~ 35 | Rotor Inertia | - 0.066 oz-in², 12x10-7 kg·m² | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Safety Standards | - CE | CE Marking | - Low Voltage Directives, EMC Directives | Insulation Class | - Class B [130ºC (266ºF)] | [Recognized as 105 (A) by UL.] Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the following places: | Case - Motor and sensor windings Dielectric Strength | - Sufficient to withstand the following for 1 minute: | Case - Motor and sensor windings 0.5 kVAC 50 Hz or 60 Hz Ambient Temperature | - 0 ~ 40ºC (32 ~ 104ºF) (non-freezing) | Ambient Humidity | - 85% or less (Non-condensing) | Degree of Protection | - IP40 (excluding the mounting surface and connector) | Stop Position Accuracy | - ±5 arc minutes (±0.083º) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | Permissible Overhung Load | - 0 in. from Shaft End = 22 lb, 0.2 in. from Shaft End = 30 lb, 0.39 in. from Shaft End = 39 lb, 0.59 in. from Shaft End = 56 lb, 0 mm from Shaft End = 100 N, 10 mm from Shaft End = 175 N, 15 mm from Shaft End = 250 N, 5 mm from Shaft End = 135 N | Permissible Axial Load | - 31 lb, 140 N | |
Product options for AZM24AKW-HS100
COMPATIBLE PRODUCTS | |
| Connection Cables | - AZD-KRD Connection Cable (0.35 m [1.2 ft.]) - LC003Z2 |
| Driver | - AZ Series Compact Driver (DC Input) - AZD-KRD |
