Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for AZ66AKD-HP5F
The AZ66AKD-HP5F specifies: This package part number has been discontinued. We are now offering these as component products., Please contact your local sales office for updated part numbers.
| Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Frame Size | - 2.36 in, 60 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Motor Length | - 5.20 in., 132 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Speed-Torque Characteristics | - Holding Torque Holding Torque | - 708 oz-in, 5 N·m | Type | - Absolute Sensor Type | Shaft/Gear Type | - Harmonic Planetary Gear (Flange Output) | Gear Ratio (X:1) | - 5 :1 | Backlash | - 15 | Feedback Device (Motor) | - Absolute Mechanical Sensor | Shaft | - Single | Electromagnetic Brake | - Not Equipped | Power Supply | - 24/48 VDC | Current | - 3.55 A | Resolution (Resolution Setting: 1000 P/R) | - 0.072 °/Pulse | Permissible Speed Range (r/min) | - 0 ~ 600 | Rotor Inertia | - 2 oz-in², 370x10-7 kg·m² | Control Power Supply | - 24 VDC ± 5%, 0.25 A | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Safety Standards | - CE | CE Marking | - EMC Directives | Components | - AZM66AK-HP5F [Motor], AZD-KD [Driver] | Maximum Input Pulse Frequency | - Line driver output by programmable controller: 1 MHz (When pulse duty is 50%) | Open-collector output by programmable controller: 250 kHz (When pulse duty is 50%) Negative Logic Pulse Input (Initial Value) Control Command | - Pulse input | Degree of Protection | - [Motor] IP66 (excluding the mounting surface and connector) | [Driver] IP10 Stop Position Accuracy | - ±5 arc minutes (±0.084º) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | Radial Load | - 0 in. from Shaft End = 47 lb, 0.2 in. from Shaft End = 51 lb, 0.39 in. from Shaft End = 56 lb, 0.59 in. from Shaft End = 63 lb, 0.79 in. from Shaft End = 69 lb, 0 mm from Shaft End = 210 N, 5 mm from Shaft End = 230 N, 10 mm from Shaft End = 250 N, 15 mm from Shaft End = 280 N, 20 mm from Shaft End = 310 N | Axial Load | - 67 lb, 300 N | Permissible Moment Load | - 730 oz-in, 5.20 N·m | |
