Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for 3IK15GN-SW2M / 3GN15SA
The 3IK15GN-SW2M / 3GN15SA specifies: These motors are coupled to an AC electromagnetic brake which is activated when power is not applied. When the power source is turned off, the motor stops instantaneously and holds the load., Power off activated type electromagnetic brake, Conforms to safety standards and global power supply voltages,
| Product Line | - Oriental Motor® |
| Motor Type | - Electromagnetic Brake - Induction |
| Frame Size | - 2.76 in, 70 mm |
| Output Power | - 15 W (1/50 HP) |
| Voltage (VAC) | - Three-Phase 200/220/230 VAC |
| Frequency (Hz) | - 60, 50 |
| Current | - 0.15 A [200 VAC, 60 Hz], 0.16 A [220 VAC, 60 Hz], 0.17 A [200 VAC, 50 Hz / 230 VAC, 60 Hz] |
| Shaft/Gear Type | - Parallel Shaft Gearhead |
| Gear Ratio (X:1) | - 15 :1 |
| Output Shaft | - Imperial |
| Output Shaft Diameter | - 3/8 in. |
| Type | - Lead Wire |
| Electromagnetic Brake | - Equipped |
| Rated Torque | - 10.6 lb-in [60 Hz] , 11.5 lb-in [50 Hz] , 1.2 N·m [60 Hz] , 1.3 N·m [50 Hz] |
| Rated Speed (rpm) | - 100 [50 Hz], 120 [60 Hz] |
| Permissible Load Inertia | - 31.5 x 10-4 oz-in², 173.25 kg·m² |
| Permissible Overhung Load | - 0.39 in. from Shaft End = 18 lb, 0.79 in. from Shaft End = 27 lb, 10 mm from Shaft End = 80 N, 20 mm from Shaft End = 120 N |
| Permissible Thrust Load | - 9 lb, 40 N |
| RoHS Compliant | - Yes |
| Safety Standards | - UL, CSA, CCC, EN, CE |
| CE Marking | - Low Voltage Directives |
| Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| Dielectric Strength | - Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| Temperature Rise | - Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead. |
| Insulation Class | - Class B (266ºF [130ºC]) |
| Overheat Protection | - Built-in thermal protector (Automatic return type). Operating temperature, open: 266ºF ± 9ºF (130ºC ± 5ºC) close: 194ºF ± 27ºF (90ºC ± 15ºC) |
| Ambient Temperature Range | - Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC) (nonfreezing), Other voltage: 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| Ambient Humidity | - 85% maximum (noncondensing) |
| Degree of Protection | - IP20 |
Product options for 3IK15GN-SW2M / 3GN15SA
COMPATIBLE PRODUCTS | |
| Accessories | - Mounting Bracket (Imperial) - SOL3U10 |
| Accessories | - Flexible Coupling (5/16 in. to 3/8 in.) - MCL30F05F06 |
| Accessories | - Mounting Bracket (Imperial) - SOL3U10 |
| Accessories | - Flexible Coupling (5/16 in. to 3/8 in.) - MCL30F05F06 |
| Accessories | - Flexible Coupling (10 mm to 3/8 in.) - MCL3010F06 |
| Accessories | - Flexible Coupling (8 mm to 3/8 in.) - MCL3008F06 |
| Accessories | - Flexible Coupling (12 mm to 3/8 in.) - MCL3012F06 |
| Accessories | - Flexible Coupling (3/8 in. to 3/8 in.) - MCL30F06F06 |
| Accessories | - Flexible Coupling (3/8 in. to 1/2 in.) - MCL30F06F08 |
| Accessories | - CR Circuit for Surge Suppression - EPCR1201-2 |
| Accessories | - Brake Pack - SB50W |
| Accessories | - Decimal Gearhead - 3GN10XS |
Product tips for 3IK15GN-SW2M / 3GN15SA
Product announcements for 3IK15GN-SW2M / 3GN15SA
Product documents for 3IK15GN-SW2M / 3GN15SA
| - Common Specifications | |
| - Electromagnetic Brake Motor Catalog | |
| - GN/GE/GU Gear Operating Manual | |
| - AC Brake Motor Operating Manual | |
| - Motor CAD 2D (DXF) |
