Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for 3IK15GN-SW2 / 3GN7.5SA
The 3IK15GN-SW2 / 3GN7.5SA specifies: Induction motors are optimal for uni-directional continuous operation such as a conveyor system., Optimal for uni-directional continuous operation, Conform to safety standards and global power supply voltages,
| Product Line | - Oriental Motor® |
| Motor Type | - Induction |
| Frame Size | - 2.76 in, 70 mm |
| Output Power | - 15 W (1/50 HP) |
| Voltage (VAC) | - Three-Phase 200/220/230 VAC |
| Frequency (Hz) | - 60, 50 |
| Current | - 0.14 A [200 VAC, 60 Hz], 0.15 A [220 VAC, 60 Hz], 0.16 A [230 VAC, 60 Hz], 0.17 A [200 VAC, 50 Hz] |
| Shaft/Gear Type | - Parallel Shaft Gearhead |
| Gear Ratio (X:1) | - 7.5 :1 |
| Output Shaft | - Imperial |
| Output Shaft Diameter | - 3/8 in. |
| Type | - Lead Wire |
| Electromagnetic Brake | - Not Equipped |
| Rated Torque | - 5.3 lb-in [60 Hz] , 5.9 lb-in [50 Hz] , 0.61 N·m [60 Hz] , 0.67 N·m [50 Hz] |
| Rated Speed (rpm) | - 200 [50 Hz], 240 [60 Hz] |
| Permissible Load Inertia | - 43.31 oz-in², 7.875 x 10-4 kg·m² |
| Permissible Overhung Load | - 0.39 in. from Shaft End = 18 lb, 0.79 in. from Shaft End = 27 lb, 10 mm from Shaft End = 80 N, 20 mm from Shaft End = 120 N |
| Permissible Thrust Load | - 9 lb, 40 N |
| RoHS Compliant | - Yes |
| Safety Standards | - UL, CSA, CCC, EN, CE |
| CE Marking | - Low Voltage Directives |
| Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| Dielectric Strength | - Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| Temperature Rise | - Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead. |
| Insulation Class | - Class B (266ºF [130ºC]) |
| Overheat Protection | - Built-in thermal protector (Automatic return type). Operating temperature, open: 266ºF ± 9ºF (130ºC ± 5ºC) close: 194ºF ± 27ºF (90ºC ± 15ºC) |
| Ambient Temperature Range | - Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC) (nonfreezing), Other voltage: 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| Ambient Humidity | - 85% maximum (noncondensing) |
| Degree of Protection | - IP20 |
Product options for 3IK15GN-SW2 / 3GN7.5SA
COMPATIBLE PRODUCTS | |
| Accessories | - Mounting Bracket (Imperial) - SOL3U10 |
| Accessories | - Flexible Coupling (5/16 in. to 3/8 in.) - MCL30F05F06 |
| Accessories | - Mounting Bracket (Imperial) - SOL3U10 |
| Accessories | - Flexible Coupling (5/16 in. to 3/8 in.) - MCL30F05F06 |
| Accessories | - Flexible Coupling (10 mm to 3/8 in.) - MCL3010F06 |
| Accessories | - Flexible Coupling (8 mm to 3/8 in.) - MCL3008F06 |
| Accessories | - Flexible Coupling (12 mm to 3/8 in.) - MCL3012F06 |
| Accessories | - Flexible Coupling (3/8 in. to 3/8 in.) - MCL30F06F06 |
| Accessories | - Flexible Coupling (3/8 in. to 1/2 in.) - MCL30F06F08 |
| Accessories | - Brake Pack - SB50W |
| Accessories | - Decimal Gearhead - 3GN10XS |
Product tips for 3IK15GN-SW2 / 3GN7.5SA
Product announcements for 3IK15GN-SW2 / 3GN7.5SA
Product documents for 3IK15GN-SW2 / 3GN7.5SA
| - Induction Motor Catalog | |
| - Common Specifications | |
| - GN/GE/GU Gear Operating Manual | |
| - World K Series Operating Manual |
