Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for 4IK25GN-CW2E / 4GN18SA
The 4IK25GN-CW2E / 4GN18SA specifies: Induction motors are optimal for uni-directional continuous operation such as a conveyor system., Optimal for uni-directional continuous operation, Conform to safety standards and global power supply voltages,
| Product Line | - Oriental Motor® |
| Motor Type | - Induction |
| Frame Size | - 3.15 in, 80 mm |
| Output Power | - 25 W (1/30 HP) |
| Voltage (VAC) | - Single-Phase 220/230 VAC |
| Frequency (Hz) | - 60, 50 |
| Current | - 0.23 A [220/230 VAC, 60 Hz], 0.27 A [220/230 VAC, 50 Hz] |
| Shaft/Gear Type | - Parallel Shaft Gearhead |
| Gear Ratio (X:1) | - 18 :1 |
| Output Shaft | - Imperial |
| Output Shaft Diameter | - 3/8 in. |
| Type | - Lead Wire |
| Rated Torque | - 22 lb-in [60 Hz] , 26 lb-in [50 Hz] , 2.5 N·m [60 Hz] , 3 N·m [50 Hz] |
| Rated Speed (rpm) | - 83 [50 Hz], 100 [60 Hz] |
| Permissible Load Inertia | - 550.80 oz-in², 100.44 x 10-4 kg·m² |
| Permissible Overhung Load | - 0.39 in. from Shaft End = 22 lb, 0.79 in. from Shaft End = 33 lb, 10 mm from Shaft End = 100 N, 20 mm from Shaft End = 150 N |
| Permissible Thrust Load | - 11.20 lb, 50 N |
| RoHS Compliant | - Yes |
| Safety Standards | - UL, CSA, CCC, EN, CE |
| CE Marking | - Low Voltage Directives |
| Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| Dielectric Strength | - Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| Temperature Rise | - Temperature rise of windings are 176ºF (80ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead. |
| Insulation Class | - Class B (266ºF [130ºC]) |
| Overheat Protection | - Built-in thermal protector (Automatic return type). Operating temperature, open: 266ºF ± 9ºF (130ºC ± 5ºC) close: 179.6ºF ± 27ºF (82ºC ± 15ºC) |
| Ambient Temperature Range | - 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| Ambient Humidity | - 85% maximum (noncondensing) |
| Degree of Protection | - IP20 |
Product options for 4IK25GN-CW2E / 4GN18SA
Product tips for 4IK25GN-CW2E / 4GN18SA
Product announcements for 4IK25GN-CW2E / 4GN18SA
Product documents for 4IK25GN-CW2E / 4GN18SA
| - Induction Motor Catalog | |
| - Common Specifications | |
| - GN/GE/GU Gear Operating Manual | |
| - World K Series Operating Manual | |
| - 3D CAD (Motor) (*.step) |
