| Product Line | - Oriental Motor® |
| Motor Type | - Torque |
| Frame Size | - 2.36 in, 60 mm |
| Output Power | - 3 W (1/250 HP) |
| Voltage (VAC) | - Single-Phase 220/230 VAC |
| Frequency (Hz) | - 60, 50 |
| Current | - 0.215 A [220 VAC, 60 Hz], 0.22 A [220 VAC, 50 Hz], 0.23 A [230 VAC, 60 Hz], 0.24 A [230 VAC, 50 Hz] |
| Shaft/Gear Type | - Parallel Shaft Gearhead |
| Gear Ratio (X:1) | - 75 :1 |
| Output Shaft | - Imperial |
| Output Shaft Diameter | - 5/16 in. |
| Starting Torque | - 26 lb-in , 3 N·m |
| Torque at Max Output | - 16.4 lb-in [60 Hz] , 17.02 lb-in [50 Hz] , 1.88 N·m [60 Hz] , 1.93 N·m [50 Hz] |
| Speed at Max Output (rpm) | - 10 [50 Hz], 12 [ 60 Hz] |
| Permissible Overhung Load | - 0.39 in. from Shaft End = 27 lb, 0.79 in. from Shaft End = 40 lb, 10 mm from Shaft End = 120 N, 20 mm from Shaft End = 180 N |
| Permissible Thrust Load | - 6.7 lb, 30 N |
| RoHS Compliant | - Yes |
| Safety Standards | - UL, CSA, CCC, CE |
| CE Marking | - Low Voltage Directives |
| Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| Dielectric Strength | - Sufficient to withstand 1.5 kV at 50Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| Temperature Rise | - Temperature rise of windings are 80ºC (176ºF) or less measured by the resistance change method after rated motor operation under normal ambient temperature and humidity. |
| Insulation Class | - Class B (266°F [130°C]) |
| Overheat Protection | - Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 194°F ± 27°F (90°C ± 15°C) |
| Ambient Temperature Range | - 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| Ambient Humidity | - 85% or less (noncondensing) |
| Degree of Protection | - IP20 |
