Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for 5IK40GN-SW2T / 5GN36SA
The 5IK40GN-SW2T / 5GN36SA specifies: Induction motors are optimal for uni-directional continuous operation such as a conveyor system., Optimal for uni-directional continuous operation, Conform to safety standards and global power supply voltages,
| Product Line | - Oriental Motor® |
| Motor Type | - Induction |
| Frame Size | - 3.54 in, 90 mm |
| Output Power | - 40 W (1/19 HP) |
| Voltage (VAC) | - Three-Phase 200/220/230 VAC |
| Frequency (Hz) | - 60, 50 |
| Current | - 0.30 A [200/220 VAC, 60 Hz], 0.31 A [230 VAC, 60 Hz], 0.32 A [200 VAC, 50 Hz] |
| Shaft/Gear Type | - Parallel Shaft Gearhead |
| Gear Ratio (X:1) | - 36 :1 |
| Output Shaft | - Imperial |
| Output Shaft Diameter | - 1/2 in. |
| Type | - Terminal Box |
| Electromagnetic Brake | - Not Equipped |
| Rated Torque | - 60 lb-in [60 Hz] , 69 lb-in [50 Hz] , 6.8 N·m [60 Hz] , 7.9 N·m [50 Hz] |
| Rated Speed (rpm) | - 41 [200 VAC, 50 Hz], 50 [60 Hz] |
| Permissible Load Inertia | - 5313.60 oz-in², 972 x 10-4 kg·m² |
| Permissible Overhung Load | - 0.39 in. from Shaft End = 67 lb, 0.79 in. from Shaft End = 101 lb, 10 mm from Shaft End = 300 N, 20 mm from Shaft End = 450 N |
| Permissible Thrust Load | - 22 lb, 100 N |
| RoHS Compliant | - Yes |
| Safety Standards | - UL, CSA, CCC, EN, CE |
| CE Marking | - Low Voltage Directives |
| Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| Dielectric Strength | - Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| Temperature Rise | - Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead. |
| Insulation Class | - Class B (266ºF [130ºC]) |
| Overheat Protection | - Built-in thermal protector (Automatic return type). Operating temperature, open: 266ºF ± 9ºF (130ºC ± 5ºC) close: 179.6ºF ± 27ºF (82ºC ± 15ºC) |
| Ambient Temperature Range | - Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC) (nonfreezing), Other voltage: 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| Ambient Humidity | - 85% maximum (noncondensing) |
| Degree of Protection | - IP54 |
Product options for 5IK40GN-SW2T / 5GN36SA
COMPATIBLE PRODUCTS | |
| Accessories | - Mounting Bracket (Imperial) - SOL5UA |
| Accessories | - Flexible Coupling (10 mm to 1/2 in.) - MCL3010F08 |
| Accessories | - Mounting Bracket (Imperial) - SOL5UA |
| Accessories | - Flexible Coupling (10 mm to 1/2 in.) - MCL3010F08 |
| Accessories | - Flexible Coupling (12 mm to 1/2 in.) - MCL3012F08 |
| Accessories | - Flexible Coupling (3/8 in. to 1/2 in.) - MCL30F06F08 |
| Accessories | - Flexible Coupling (1/2 in. to 1/2 in.) - MCL30F08F08 |
| Accessories | - Flexible Coupling (10 mm to 1/2 in.) - MCL4010F08 |
| Accessories | - Flexible Coupling (12 mm to 1/2 in.) - MCL4012F08 |
| Accessories | - Flexible Coupling (14 mm to 1/2 in.) - MCL4014F08 |
| Accessories | - Flexible Coupling (15 mm to 1/2 in.) - MCL4015F08 |
| Accessories | - Flexible Coupling (3/8 in. to 1/2 in.) - MCL40F06F08 |
| Accessories | - Flexible Coupling (1/2 in. to 1/2 in.) - MCL40F08F08 |
| Accessories | - Flexible Coupling (1/2 in. to 5/8 in.) - MCL40F08F10 |
| Accessories | - Decimal Gearhead - 5GN10XS |
Product tips for 5IK40GN-SW2T / 5GN36SA
Product announcements for 5IK40GN-SW2T / 5GN36SA
Product documents for 5IK40GN-SW2T / 5GN36SA
| - Induction Motor Catalog | |
| - Common Specifications | |
| - GN/GE/GU Gear Operating Manual | |
| - AC Motor Operating Manual | |
| - 3D CAD (Motor) (*.step) |
