60 W (1/12 HP) Clutch & Brake Motor (90:1 Gear Ratio) (Single-Phase 110/115 VAC) - CBI560-801WU / 5GCH90KA

Product specifications for CBI560-801WU / 5GCH90KA

The CBI560-801WU / 5GCH90KA specifies: This product is scheduled to be discontinued. Please contact your local sales office for more information.

Product Line	- Oriental Motor®
Motor Type	- Clutch & Brake
Frame Size	- 3.54 in, 90 mm
Output Power	- 60 W (1/12 HP)
Voltage (VAC)	- Single-Phase 110/115 VAC
Frequency (Hz)	- 60
Current	- 1.09 A [110 VAC], 1.10 A [115 VAC]
Shaft/Gear Type	- Parallel Shaft Gearhead
Gear Ratio (X:1)	- 90 :1
Output Shaft Diameter	- 5/8 in.
Holding Brake Torque	- 210 oz-in, 1.50 N·m
Rated Speed (rpm)	- 20
Permissible Overhung Load	- 0.39 in. from Shaft End = 112 lb, 0.79 in. from Shaft End = 157 lb, 10 mm from Shaft End = 500 N, 20 mm from Shaft End = 700 N
Permissible Thrust Load	- 33 lb, 150 N
RoHS Compliant	- No
Safety Standards	- UL, CSA, EN, CE
CE Marking	- Low Voltage Directives
Insulation Resistance	- 100 MΩ or more when 500 VDC is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity.
Dielectric Strength	- Sufficient to withstand 1.5 kV at 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity.
Temperature Rise	- 176ºF (80ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead.
Insulation Class	- Class B (266ºF [130ºC])
Ambient Temperature Range	- 14ºF ~ 122ºF (-10ºC ~ 50ºC) (nonfreezing)
Ambient Humidity	- 85% maximum (noncondensing)
Degree of Protection	- IP20