Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for BHI62E-9
The BHI62E-9 specifies: Induction motors are optimal for uni-directional continuous operation such as a conveyor system., The smallest frame size (4.09 inch [104 mm]) in the 1/3.73 HP (200 W) output class, Approved under typical international safety standards; bears the CE marking, Combination type, with the motor and the gearhead coming pre-assembled,
Product Line | - Oriental Motor® |
Motor Type | - Induction |
Frame Size | - 4.09 in, 104 mm |
Output Power | - 200 W (1/4 HP) |
Voltage (VAC) | - Single-Phase 220/230 VAC |
Frequency (Hz) | - 60, 50 |
Current | - 1.5 A |
Shaft/Gear Type | - Parallel Shaft Gearhead |
Gear Ratio (X:1) | - 9 :1 |
Output Shaft Diameter | - 18 mm |
Electromagnetic Brake | - Not Equipped |
Rated Torque | - 108 lb-in [50 Hz] , 91 lb-in [60 Hz] , 10.3 N·m [60 Hz] , 12.3 N·m [50 Hz] |
Rated Speed (rpm) | - 167 [50 Hz], 200 [60 Hz] |
Permissible Load Inertia | - 883 oz-in², 162 x 10-4 kg·m² |
Permissible Overhung Load | - 0.39 in. from Shaft End = 123 lb, 0.79 in. from Shaft End = 180 lb, 10 mm from Shaft End = 550 N, 20 mm from Shaft End = 800 N |
Permissible Thrust Load | - 45 lb, 200 N |
RoHS Compliant | - Yes |
Safety Standards | - UL, CSA, CCC, CE |
CE Marking | - Low Voltage Directives |
Insulation Resistance | - 100 MΩ or more when 500 VDC is applied between the windings and the case after rated motor operation under normal ambient temperature and humidity. |
Dielectric Strength | - Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated motor operation under normal ambient temperature and humidity. |
Temperature Rise | - Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead |
Insulation Class | - Class B (266ºF [130ºC]) |
Overheat Protection | - Built-in thermal protector (Automatic return type). Operating temperature, open: 302ºF ± 9ºF (150ºC ± 5ºC) close: 204.8ºF ± 27ºF (96ºC ± 15ºC) |
Ambient Temperature Range | - 14ºF ~ 104ºF (-10ºC ~ 40ºC) (non-freezing) |
Ambient Humidity | - 85% or less (Non-condensing) |
Degree of Protection | - IP40 |
Product options for BHI62E-9
COMPATIBLE PRODUCTS | |
Accessories | - Mounting Bracket (Metric) - SOL6M8 |
Accessories | - Flexible Coupling (18 mm to 5/8 in.) - MCL5518F10 |
Accessories | - Mounting Bracket (Metric) - SOL6M8 |
Accessories | - Flexible Coupling (18 mm to 5/8 in.) - MCL5518F10 |
Accessories | - Flexible Coupling (18 mm to 19.05) - MCL5518F12 |
Accessories | - Flexible Coupling (18 mm to 5/8 in.) - MCL6518F10 |
Accessories | - Flexible Coupling (18 mm to 3/4 in.) - MCL6518F12 |
Accessories | - CR Circuit for Surge Suppression - EPCR1201-2 |
Replacement Capacitor | - Replacement Capacitor - CH100BFAUL-C |
Product tips for BHI62E-9
Product announcements for BHI62E-9
Product documents for BHI62E-9
- Product Catalog | |
- BH Series Induction Motors 200W (RoHS) Manual | |
- 3D CAD (Motor) (*.step) |