Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for BHI62FT-A
The BHI62FT-A specifies: This product is scheduled to be discontinued, please contact your local sales office for more information.
Product Line | - Oriental Motor® |
Motor Type | - Induction |
Frame Size | - 4.09 in, 104 mm |
Output Power | - 200 W (1/4 HP) |
Voltage (VAC) | - Single-Phase 110/115 VAC |
Frequency (Hz) | - 60 |
Current | - 3.0 A |
Shaft/Gear Type | - Round Shaft (No Gearhead) |
Output Shaft Diameter | - 14 mm |
Electromagnetic Brake | - Not Equipped |
Rated Torque | - 11.25 lb-in , 1.27 N·m |
Rated Speed (rpm) | - 1500 [60 Hz] |
Permissible Overhung Load | - 0.39 in. from Shaft End = 72 lb, 0.79 in. from Shaft End = 78 lb, 10 mm from Shaft End = 320 N, 20 mm from Shaft End = 350 N |
Permissible Thrust Load | - Avoid thrust load as much as possible.If thrust load is unavoidable, keep it to half or less of the motor mass. |
RoHS Compliant | - Yes |
Safety Standards | - UL, CSA, CCC, CE |
CE Marking | - Low Voltage Directives |
Insulation Resistance | - 100 MΩ or more when 500 VDC is applied between the windings and the case after rated motor operation under normal ambient temperature and humidity. |
Dielectric Strength | - Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated motor operation under normal ambient temperature and humidity. |
Temperature Rise | - Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to aluminum heat radiation plate (9.06 in. x 9.06 in.) (0.20 in. thickness). |
Insulation Class | - Class B (266ºF [130ºC]) |
Overheat Protection | - Built-in thermal protector (Automatic return type). Operating temperature, open: 302ºF ± 9ºF (150ºC ± 5ºC) close: 204.8ºF ± 27ºF (96ºC ± 15ºC) |
Ambient Temperature Range | - 14ºF ~ 104ºF (-10ºC ~ 40ºC) (non-freezing) |
Ambient Humidity | - 85% or less (Non-condensing) |
Degree of Protection | - IP54 (excluding the installation surface) |
Product options for BHI62FT-A
COMPATIBLE PRODUCTS | |
Accessories | - Mounting Bracket (Metric) - SOL6M8 |
Accessories | - Flexible Coupling (14 mm to 3/8 in.) - MCL4014F06 |
Accessories | - Mounting Bracket (Metric) - SOL6M8 |
Accessories | - Flexible Coupling (14 mm to 3/8 in.) - MCL4014F06 |
Accessories | - Flexible Coupling (14 mm to 1/2 in.) - MCL4014F08 |
Accessories | - Flexible Coupling (14 mm to 5/8 in.) - MCL4014F10 |
Accessories | - CR Circuit for Surge Suppression - EPCR1201-2 |
Replacement Capacitor | - Replacement Capacitor - CH400CFAUL2-C |
Product tips for BHI62FT-A
Product announcements for BHI62FT-A
Product documents for BHI62FT-A
- Product Catalog | |
- BH Series Induction Motors 200W (RoHS) Manual | |
- 3D CAD (Motor) (*.step) |