Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for 2IK6A-UA
The 2IK6A-UA specifies: The next generation KII Series offers higher strength gears that maximize motor performance with ease of use wiring and mounting, all at affordable prices., Metric Output Shaft, Low Noise,
Product Line | - Oriental Motor® |
Motor Type | - Induction |
Frame Size | - 2.36 in, 60 mm |
Output Power | - 6 W (1/125 HP) |
Voltage (VAC) | - Single-Phase 110/115 VAC |
Frequency (Hz) | - 60 |
Current | - 0.185 A [110 VAC], 0.189 A [115 VAC] |
Electromagnetic Brake | - Not Equipped |
Type | - Lead Wire |
Shaft/Gear Type | - Round Shaft (No Gearhead) |
Output Shaft Diameter | - 6 mm |
Rated Torque | - 0.36 lb-in , 0.041 N·m |
Rated Speed (rpm) | - 1450 |
Permissible Load Inertia | - 0.34 oz-in², 0.062 x 10-4 kg·m² |
Permissible Overhung Load | - 0.39 in. from Output Shaft End = 11.2 lb, 0.79 in. from Output Shaft End = 24 lb, 10 mm from Output Shaft End = 50 N, 20 mm from Output Shaft End = 110 N |
RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards | - UL, CCC, CE |
CE Marking | - Low Voltage Directives |
Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity. |
Dielectric Strength | - Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity. |
Temperature Rise | - Temperature rise of windings are 176ºF (80ºC) or less measured by the resistance change method after rated operation under normal ambient temperature and humidity. |
Thermal Class | - 130 (B) |
Overheat Protection | - Impedance protection |
Ambient Temperature Range | - 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity | - 85% or less (noncondensing) |
Degree of Protection | - IP20 |
Product options for 2IK6A-UA
COMPATIBLE PRODUCTS | |
Accessories | - Mounting Bracket (Metric) - SOL2M4F |
Accessories | - Capacitor Mounting Bracket - PADP01C |
Accessories | - Mounting Bracket (Metric) - SOL2M4F |
Accessories | - Capacitor Mounting Bracket - PADP01C |
Accessories | - Capacitor Connector Lead Wires (5 sets) - LCCN0510 |
Accessories | - Brake Pack - SB50W |
Accessories | - CR Circuit for Surge Suppression - EPCR1201-2 |
Replacement Capacitor | - Replacement Capacitor - CH25FAUL2-C |