Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for 5IK100VKEST-5H30S
The 5IK100VKEST-5H30S specifies: This product is scheduled to be discontinued, please contact your local sales office for more information.
Product Line | - Oriental Motor® |
Motor Type | - Induction |
Frame Size | - 3.54 in, 90 mm |
Output Power | - 100 W (1/8 HP) |
Voltage (VAC) | - Three-Phase 220/230/240 VAC |
Frequency (Hz) | - 60, 50 |
Current | - 0.49 A [50 Hz] 0.46 A [220 VAC, 60 Hz] 0.45 A [230 VAC, 60 Hz] |
Type | - Terminal Box |
Electromagnetic Brake | - Not Equipped |
Shaft/Gear Type | - Right-Angle Hollow Shaft (Stainless Steel) Gearhead |
Gear Ratio (X:1) | - 30 :1 |
Output Shaft Diameter | - 15 mm |
Rated Torque | - 109 lb-in[50 Hz] , 112 lb-in [60 Hz] , 12.4 N·m [60 Hz] , 12.7 N·m [50 Hz] |
Starting Torque | - 112 |
StartingTorque | - 12.7 |
Rated Speed (rpm) | - 50 [50 Hz], 60 [60 Hz] |
Permissible Load Inertia | - Instantaneous Stop = 3300 oz-in², 9800 oz-in², Instantaneous Stop = 600 x 10-4 kg·m², 1800 x 10-4 kg·m² |
Permissible Overhung Load | - 0.79 in. from Shaft End = 181 lb, 0.39 in. from Shaft End = 200 lb, 10 mm from Shaft End = 923 N, 20 mm from Shaft End = 806 N |
Permissible Thrust Load | - 55 lb, 245 N |
Components | - 5H30S [Gearhead], 5IK100VKEST [Motor] |
RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards | - UL, CCC, CE |
CE Marking | - Low Voltage Directives |
Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity. |
Dielectric Strength | - Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity. |
Temperature Rise | - A gearhead or equivalent heat sink [7.87 x 7.87 in. (200 x 200 mm), 0.20 in. (5 mm) thick, material aluminum] is connected to the motor and the winding temperature rise is measured at 176ºF (80ºC) or less using the resistance change method after |
Thermal Class | - 130 (B) |
Ambient Temperature Range | - 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity | - 85% or less (noncondensing) |
Degree of Protection | - IP66 |
Product options for 5IK100VKEST-5H30S
COMPATIBLE PRODUCTS | |
Accessories | - Torque Arm - TAF2S-15-NS |
Accessories | - CR Circuit for Surge Suppression - EPCR1201-2 |
Product tips for 5IK100VKEST-5H30S
Product announcements for 5IK100VKEST-5H30S
Product documents for 5IK100VKEST-5H30S
- 3D CAD (*.step) | |
- KIIS Series with JH Gear Operating Manual |