Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for 5IK40AA-FCH
The 5IK40AA-FCH specifies: This product has been discontinued, please contact your local sales office for more information.
Product Line | - Oriental Motor® |
Motor Type | - Induction |
Frame Size | - 3.54 in, 90 mm |
Output Power | - 40 W (1/19 HP) |
Voltage (VAC) | - Single-Phase 110/115 VAC |
Frequency (Hz) | - 60 |
Current | - 0.67 A [115 VAC], 0.68 A [110 VAC] |
Shaft/Gear Type | - Round Shaft (No Gearhead) |
Output Shaft | - Imperial |
Output Shaft Diameter | - 3/8 in. |
Type | - Conduit Box |
Electromagnetic Brake | - Not Equipped |
Rated Torque | - 2.25 lb-in , 0.26 N·m |
Rated Speed (rpm) | - 1500 |
Permissible Overhung Load | - 0.39 in. from Shaft End = 31 lb, 0.79 in. from Shaft End = 45 lb, 10 mm from Shaft End = 140 N, 20 mm from Shaft End = 200 N |
Permissible Thrust Load | - Avoid thrust load as much as possible.If thrust load is unavoidable, keep it to half or less of the motor mass. |
RoHS Compliant | - Yes |
Safety Standards | - UL, CSA, EN, CE |
CE Marking | - Low Voltage Directives |
Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
Dielectric Strength | - Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
Temperature Rise | - Temperature rise of windings are 176ºF (80ºC) or less measured by the resistance change method after rated motor operation with connection to aluminum heat radiation plate (6.5 in. x 6.5 in.) [0.20 in. thickness] |
Insulation Class | - Class B (266ºF [130ºC]) |
Overheat Protection | - Built-in thermal protector (Automatic return type). Operating temperature, open: 266ºF ± 9ºF (130ºC ± 5ºC) close: 179.6ºF ± 27ºF (82ºC ± 15ºC) |
Ambient Temperature Range | - 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity | - 85% maximum (noncondensing) |
Degree of Protection | - IP54 (excluding the installation surface of the round shaft type) |
Product options for 5IK40AA-FCH
COMPATIBLE PRODUCTS | |
Accessories | - Mounting Bracket (Imperial) - SOL5UA |