Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for 4IK25A-SW2T
The 4IK25A-SW2T specifies: Induction motors are optimal for uni-directional continuous operation such as a conveyor system., Optimal for uni-directional continuous operation, Conform to safety standards and global power supply voltages,
Product Line | - Oriental Motor® |
Motor Type | - Induction |
Frame Size | - 3.15 in, 80 mm |
Output Power | - 25 W (1/30 HP) |
Voltage (VAC) | - Three-Phase 200/220/230 VAC |
Frequency (Hz) | - 60, 50 |
Current | - 0.21 A [200/220 VAC, 60 Hz], 0.22 A [230 VAC, 60 Hz], 0.23 A [200 VAC, 50 Hz] |
Shaft/Gear Type | - Round Shaft (No Gearhead) |
Output Shaft | - Metric |
Output Shaft Diameter | - 8 mm |
Type | - Terminal Box |
Electromagnetic Brake | - Not Equipped |
Rated Torque | - 1.38 lb-in [60 Hz] , 1.63 lb-in [50 Hz] , 0.16 N·m [60 Hz] , 0.19 N·m [50 Hz] |
Rated Speed (rpm) | - 1300 [200 VAC, 50 Hz], 1600 [60 Hz] |
Permissible Overhung Load | - 0.39 in. from Shaft End = 20 lb, 0.79 in. from Shaft End = 31 lb, 10 mm from Shaft End = 90 N, 20 mm from Shaft End = 140 N |
Permissible Thrust Load | - Avoid thrust load as much as possible.If thrust load is unavoidable, keep it to half or less of the motor mass. |
RoHS Compliant | - Yes |
Safety Standards | - UL, CSA, CCC, EN, CE |
CE Marking | - Low Voltage Directives |
Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
Dielectric Strength | - Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
Temperature Rise | - Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to an aluminum heat radiation plate [5.31 x 5.31 in. (135 x 135 mm), Thickness: 0.2 in. (5 mm)] |
Insulation Class | - Class B (266ºF [130ºC]) |
Overheat Protection | - Built-in thermal protector (Automatic return type). Operating temperature, open: 266ºF ± 9ºF (130ºC ± 5ºC) close: 179.6ºF ± 27ºF (82ºC ± 15ºC) |
Ambient Temperature Range | - Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC) (nonfreezing), Other voltage: 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity | - 85% maximum (noncondensing) |
Degree of Protection | - IP54 (excluding the installation surface of the round shaft type) |
Product options for 4IK25A-SW2T
COMPATIBLE PRODUCTS | |
Accessories | - Mounting Bracket (Imperial) - SOL4U10 |