Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for 5RK40A-UAT2
The 5RK40A-UAT2 specifies: Ideal for bi-directional operation, KII Series Reversible motors offer higher strength gears that maximize motor performance and extend the rated life, with ease of use wiring and mounting, all at affordable prices., Instantaneous Bi-Directional Operation, Metric Output Shaft, Low Noise, 30-minute rating (can be extended depending on operating conditions,
Product Line | - Oriental Motor® |
Motor Type | - Reversible |
Frame Size | - 3.54 in, 90 mm |
Output Power | - 40 W (1/19 HP) |
Voltage (VAC) | - Single-Phase 110/115 VAC |
Frequency (Hz) | - 60 |
Current | - 0.81 A |
Type | - Terminal Box |
Electromagnetic Brake | - Not Equipped |
Shaft/Gear Type | - Round Shaft (No Gearhead) |
Output Shaft Diameter | - 10 mm |
Rated Torque | - 2.188 lb-in , 0.25 N·m |
Rated Speed (rpm) | - 1570 |
Permissible Load Inertia | - 6 oz-in², 1.1 x; 10-4 kg·m² |
Permissible Overhung Load | - 0.39 in. from Output Shaft End = 31 lb, 0.79 in. from Output Shaft End = 45 lb, 10 mm from Output Shaft End = 140 N, 20 mm from Output Shaft End = 200 N |
Permissible Thrust Load | - Avoid axial load as much as possible. If axial load is unavoidable, keep it to half or less of the motor mass. |
RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards | - UL, CE |
CE Marking | - Low Voltage Directives |
Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity. |
Dielectric Strength | - Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity. |
Temperature Rise | - Temperature rise of windings are 176ºF (80ºC) or less measured by the resistance change method after rated operation under normal ambient temperature and humidity with 165 mm x 165 mm x 5mm Aluminum heat sink. |
Insulation Class | - 130 (B) |
Overheat Protection | - Built-in thermal protector (automatic return type). Open: 266 ± 9ºF (130 ± 5ºC) Close: 185 ± 36ºF (85 ± 20ºC) |
Ambient Temperature Range | - 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity | - 85% or less (noncondensing) |
Degree of Protection | - IP40 |
Product options for 5RK40A-UAT2
COMPATIBLE PRODUCTS | |
Accessories | - Mounting Bracket (Metric) - SOL5M8F |
Accessories | - Capacitor Mounting Bracket - PADP01C |
Accessories | - Mounting Bracket (Metric) - SOL5M8F |
Accessories | - Capacitor Mounting Bracket - PADP01C |
Accessories | - Capacitor Connector Lead Wires (5 sets) - LCCN0510 |
Accessories | - CR Circuit for Surge Suppression - EPCR1201-2 |
Accessories | - Brake Pack - SB50W |
Replacement Capacitor | - Replacement Capacitor - CH120CFAUL2-C |