Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for SCM425UA-36 / DSCD25UA
The SCM425UA-36 / DSCD25UA specifies: The DSC Series features AC motors and speed controllers that utilized Oriental Motor's exclusive technology., Closed Loop Control for High Reliability, Easy Installation and Simple Data Setting, Compact Motor and Controller (with Capacitor),
Product Line | - Oriental Motor® |
Motor Type | - AC Motor |
Motor | - Induction |
Frame Size | - 3.15 in, 80 mm |
Output Power | - 25 W (1/30 HP) |
Power Supply | - Single-Phase 110/115 VAC |
Frequency (Hz) | - 60 |
Current | - 0.75 A |
Control Power Source | - 24 VDC ±10% 0.15 A or more |
Shaft/Gear Type | - Parallel Shaft Gearhead |
Gear Ratio (X:1) | - 36 :1 |
Output Shaft Diameter | - 15 mm |
Electromagnetic Brake | - Not Equipped |
Permissible Torque | - 55 lb-in , 6.3 N·m |
Variable Speed Range (r/min) | - 2.5 ~ 44 |
Permissible Load Inertia | - 6000 oz-in², 1100 x 10-4 kg·m² |
Permissible Overhung Load | - 0.39 in. from Shaft End = 101 lb, 0.79 in. from Shaft End = 112 lb, 10 mm from Shaft End = 450 N, 20 mm from Shaft End = 550 N |
Permissible Thrust Load | - 22 lb, 100 N |
RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards | - c-UL, CCC, CE |
CE Marking | - Low Voltage Directives, EMC Directive |
Insulation Resistance | - [Controller] 100 MΩ or more when measured by a 500 VDC between the main circuit terminal and the control circuit terminal, between the main circuit terminal and the case and between the main circuit terminal and FG after continuous operation under normal ambient temperature and humidity., [Motor] 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity. |
Dielectric Strength | - [Controller] Sufficient to withstand 1.9 kVAC at 50 Hz or 60 Hz applied between the main circuit terminal and the control circuit terminal, and between the main circuit terminal and the case, and 1.5 kVAC at 50 Hz or 60 Hz applied between the main circuit terminal and FG for 1 minute after continuous operation under normal ambient temperature and humidity., [Motor] Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity. |
Temperature Rise | - A gearhead or equivalent heat sink is connected to the motor and the winding temperature rise is measured at 176ºF (80ºC) or less using the resistance change method after rated operation with no load under normal ambient temperature and humidity. |
Overheat Protection Device | - Built-in Thermal Protector (automatic return type) |
Ambient Temperature Range | - [Controller] 32ºF ~ 122ºF (0ºC ~ 50ºC), [Motor] 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity | - 85% max. (non-condensing) |
Altitude | - Max. of 1000 m (3300 ft.) above sea level |
Thermal Class | - 130 (B) |
Degree of Protection | - IP20 |
Product options for SCM425UA-36 / DSCD25UA
Product tips for SCM425UA-36 / DSCD25UA
Product announcements for SCM425UA-36 / DSCD25UA
Product documents for SCM425UA-36 / DSCD25UA
- SCM Motor Operating Manual | |
- Driver Operating Manual | |
- 3D CAD (Motor) (*.step) | |
- 3D CAD (Driver) (*.step) |