30 W (1/25 HP) Brushless DC Motor Speed Control System (30:1 Gear Ratio) (Single-Phase 100-120 VAC) - BXM230-30 / BXSD30-A2

Product specifications for BXM230-30 / BXSD30-A2

The BXM230-30 / BXSD30-A2 specifies: The BXII Series brushless DC motor and driver packages offer high performance and high function, now up to 4,000 r/min, for a wide range of applications. The driver is user friendly with easy wiring, data setting and LED display on the front panel and is compact and easy to mount., Speed Control, positioning, torque limiting, Speed Control Range: 2 ~ 4000 r/min (digital setting), 30 ~ 4000 r/min (analog setting), MEXE02 software (free download) or OPX-2A Control Module (sold separately), Motor Connection Cables required* (sold separately),

Motor Type	- Brushless DC Motor
Motor Frame Size	- 2.36 in., 60 mm
Output Power	- 30 W (1/25 HP)
Power Supply	- Single-Phase 100-120 VAC
Frequency	- 50 Hz, 60 Hz
Rated Input Current	- 1.4 A
Shaft/Gear Type	- Parallel Shaft Gearhead
Gear Ratio (X:1)	- 30 :1
Output Shaft Diameter	- 10 mm
Degree of Protection (Motor)	- IP54
Rated Torque	- 23 lb-in, 2.6 N·m
Electromagnetic Brake	- Not Equipped
Variable Speed Range (r/min)	- Digital setting: 0.07 ~ 133 r/min (2000:1) Analog setting: 1 ~ 133 r/min (133:1)
Permissible Load Inertia	- *Speed 3000 r/min or lower, accel/decel time 0.4 sec or longer = 4000 or larger oz-in², 2000 oz-in², *Speed 3000 r/min or lower, accel/decel time 0.4 sec or longer = 740 x 10-4 or larger kg·m², 370 x 10-4 kg·m²
Permissible Overhung Load	- 0.39 in. from Shaft End = 45 0.79 in. from Shaft End = 67 lb, 10 mm from Shaft End = 200 20 mm from Shaft End = 300 N
Permissible Thrust Load	- 9 lb, 40 N
Max. Extension Length (m)	- Motor and driver distance: 99.7 ft. (30.4 m)
Components	- BXSD30-A2 [Driver], BXM230-30 [Motor]
RoHS Compliant	- These products do not contain substances that exceed the regulation values in the RoHS Directive.
Safety Standards	- UL, CSA, CE
CE Marking	- Low Voltage Directives, EMC Directives
Insulation Resistance (Motor)	- 100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity (except for encoder).
Insulation Resistance (Driver)	- 100 M Ω or more when 500 VDC megger is applied between the power supply input terminal and the case, and between the power supply input terminal and the I/O terminal after continuous operation under normal ambient temperature and humidity.
Dielectric Strength (Motor)	- Sufficient to withstand 1.5 kVAC at 50 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity (except for encoder).
Dielectric Strength (Driver)	- Sufficient to withstand 1.5 kVAC, 50 Hz applied between case and power supply input for 1 min. and 1.5 kVAC, 50 Hz applied between power supply input and the I/O terminal for 1 min. after continuous operation under normal ambient temperature and humidity.
Temperature Rise (Motor)	- Temperature rise of the windings is 50ºC (90ºF) max. and that of the case surface is 40ºC (72ºF) max, measured by the thermocouple method after rated continuous operation under normal ambient temperature and humidity.
Temperature Rise (Driver)	- Temperature rise of the heat sink is 50ºC (90ºF) max. measured by the thermocouple method after rated continuous operation under normal ambient temperature and humidity.
Ambient Temperature Range	- 32ºF ~ 122ºF (0ºC ~ 50ºC), nonfreezing
Ambient Humidity	- 85% max. (non-condensing)
Operating Atmosphere	- No corrosive gases or dust. Cannot be used in a radioactive area, magnetic field, vacuum, or other special environments.
Altitude	- Max of 10000 ft. (3000 m) above sea level
Insulation Class	- UL/CSA Standards: 105 (A), EN Standards: 120 (E)
Degree of Protection	- IP54 (excluding connectors) [Motor] IP20 [Driver]